Limits...
Resin bonding of metal brackets to glazed zirconia with a porcelain primer.

Lee JH, Lee M, Kim KN, Hwang CJ - Korean J Orthod (2015)

Bottom Line: No statistically significant differences were found among groups NZ, GP, and GZP.In groups NZ and GP, bonding failed at the interface between the resin cement and bracket base or showed complex adhesive and cohesive failure.Porcelain primer is the more appropriate choice for bonding a metal bracket to the surface of a full-contour glazed zirconia crown with resin cement.

View Article: PubMed Central - PubMed

Affiliation: Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan, Korea. ; Department and Research Institute of Dental Biomaterials and Bioengineering, BK21 PLUS Project, College of Dentistry, Yonsei University, Seoul, Korea.

ABSTRACT

Objective: The aims of this study were to compare the shear bond strength between orthodontic metal brackets and glazed zirconia using different types of primer before applying resin cement and to determine which primer was more effective.

Methods: Zirconia blocks were milled and embedded in acrylic resin and randomly assigned to one of four groups: nonglazed zirconia with sandblasting and zirconia primer (NZ); glazed zirconia with sandblasting, etching, and zirconia primer (GZ); glazed zirconia with sandblasting, etching, and porcelain primer (GP); and glazed zirconia with sandblasting, etching, zirconia primer, and porcelain primer (GZP). A stainless steel metal bracket was bonded to each target surface with resin cement, and all specimens underwent thermal cycling. The shear bond strength of the specimens was measured by a universal testing machine. A scanning electron microscope, three-dimensional optical surface-profiler, and stereoscopic microscope were used to image the zirconia surfaces. The data were analyzed with one-way analyses of variance and the Fisher exact test.

Results: Group GZ showed significantly lower shear bond strength than did the other groups. No statistically significant differences were found among groups NZ, GP, and GZP. All specimens in group GZ showed adhesive failure between the zirconia and resin cement. In groups NZ and GP, bonding failed at the interface between the resin cement and bracket base or showed complex adhesive and cohesive failure.

Conclusions: Porcelain primer is the more appropriate choice for bonding a metal bracket to the surface of a full-contour glazed zirconia crown with resin cement.

No MeSH data available.


A, Schematic illustration of the shear-bond-strength test. B, Equipment for measuring shear bond strength.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4664906&req=5

Figure 1: A, Schematic illustration of the shear-bond-strength test. B, Equipment for measuring shear bond strength.

Mentions: The shear bond strength of the specimens was measured by a universal testing machine (Model 3366; InstronĀ® Co., Norwood, MA, USA) at a cross-head speed of 1 mm/min. The measured values were then divided by the area of the bracket base (9.81 mm2) and converted to units of MPa (Figure 1).


Resin bonding of metal brackets to glazed zirconia with a porcelain primer.

Lee JH, Lee M, Kim KN, Hwang CJ - Korean J Orthod (2015)

A, Schematic illustration of the shear-bond-strength test. B, Equipment for measuring shear bond strength.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4664906&req=5

Figure 1: A, Schematic illustration of the shear-bond-strength test. B, Equipment for measuring shear bond strength.
Mentions: The shear bond strength of the specimens was measured by a universal testing machine (Model 3366; InstronĀ® Co., Norwood, MA, USA) at a cross-head speed of 1 mm/min. The measured values were then divided by the area of the bracket base (9.81 mm2) and converted to units of MPa (Figure 1).

Bottom Line: No statistically significant differences were found among groups NZ, GP, and GZP.In groups NZ and GP, bonding failed at the interface between the resin cement and bracket base or showed complex adhesive and cohesive failure.Porcelain primer is the more appropriate choice for bonding a metal bracket to the surface of a full-contour glazed zirconia crown with resin cement.

View Article: PubMed Central - PubMed

Affiliation: Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan, Korea. ; Department and Research Institute of Dental Biomaterials and Bioengineering, BK21 PLUS Project, College of Dentistry, Yonsei University, Seoul, Korea.

ABSTRACT

Objective: The aims of this study were to compare the shear bond strength between orthodontic metal brackets and glazed zirconia using different types of primer before applying resin cement and to determine which primer was more effective.

Methods: Zirconia blocks were milled and embedded in acrylic resin and randomly assigned to one of four groups: nonglazed zirconia with sandblasting and zirconia primer (NZ); glazed zirconia with sandblasting, etching, and zirconia primer (GZ); glazed zirconia with sandblasting, etching, and porcelain primer (GP); and glazed zirconia with sandblasting, etching, zirconia primer, and porcelain primer (GZP). A stainless steel metal bracket was bonded to each target surface with resin cement, and all specimens underwent thermal cycling. The shear bond strength of the specimens was measured by a universal testing machine. A scanning electron microscope, three-dimensional optical surface-profiler, and stereoscopic microscope were used to image the zirconia surfaces. The data were analyzed with one-way analyses of variance and the Fisher exact test.

Results: Group GZ showed significantly lower shear bond strength than did the other groups. No statistically significant differences were found among groups NZ, GP, and GZP. All specimens in group GZ showed adhesive failure between the zirconia and resin cement. In groups NZ and GP, bonding failed at the interface between the resin cement and bracket base or showed complex adhesive and cohesive failure.

Conclusions: Porcelain primer is the more appropriate choice for bonding a metal bracket to the surface of a full-contour glazed zirconia crown with resin cement.

No MeSH data available.