Limits...
24% Indigenously Prepared Ethylene Diamine Tetra Acetic Acid Compared to Self-Etching Adhesives and their Effect on Shear Bond Strength of Composites in Primary Teeth: An In-vitro Study.

Nagar P, Tandil YL, T P C, Gupta A, Kalaria D, Kumar P - J Int Oral Health (2015)

Bottom Line: These etchants have been found to have shear bond strength comparable to phosphoric acid.In this study, indigenously prepared 24% ethylenediaminetetraacetic acid (EDTA) has been compared with established etchants, as to prove if their shear bond strength was closely related.Single etch followed by NRC has the second and third highest bond strength values, which are comparable to phosphoric acid.

View Article: PubMed Central - PubMed

Affiliation: Reader, Department of Pedodontics & Preventive Dentistry, Krishnadevaraya College of Dental Sciences, Bangalore, Karnataka, India.

ABSTRACT

Background: Over the years, it has been known that 34% phosphoric acid is the benchmark in etchants with the best shear bond strength shown with composites in primary teeth. However, with latest technological advancements and innovations, in order to reduce the number of steps and less damage to the tooth structure, non-rinse conditioner (NRC) & Single-Etch and various other etchants have been tried and tested. These etchants have been found to have shear bond strength comparable to phosphoric acid. In this study, indigenously prepared 24% ethylenediaminetetraacetic acid (EDTA) has been compared with established etchants, as to prove if their shear bond strength was closely related. As it is a well-known fact that EDTA could be less damaging to the enamel during etching and hence can be an alternative for etching of primary teeth.

Materials and methods: For the study 60 caries-free primary molars were used, they were sectioned in the middle, after making area for bonding; the marked area was then etched using different etchants for 30 s. Each of the teeth was then rinsed and bonded with composite resin and thermocycling was done. Shear bond strength testing was done on the composite using Universal Testing Machine.

Results: Results of the study showed that phosphoric acid showed the highest bond strength, closely followed by Single Etch (Adper Prompt) and NRC, then by EDTA.

Conclusions: About 24% EDTA can be another comparable replacement for phosphoric acid if used with a Single Etch Primer, like Prime and Bond NT on primary teeth. 34% phosphoric acid has the highest bond strength values with composite resin. Single etch followed by NRC has the second and third highest bond strength values, which are comparable to phosphoric acid.

No MeSH data available.


Related in: MedlinePlus

Comparison of mean bond strength values of various etchants
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4588791&req=5

Figure 1: Comparison of mean bond strength values of various etchants

Mentions: The mean bond strength values of various etchants were phosphoric acid (22.35 MPa), single etch (Adper Prompt) (19.59 MPa), NRC (17.02 MPa), and the lowest by EDTA (14.02 MPa). (Table 1 and Graph 1).


24% Indigenously Prepared Ethylene Diamine Tetra Acetic Acid Compared to Self-Etching Adhesives and their Effect on Shear Bond Strength of Composites in Primary Teeth: An In-vitro Study.

Nagar P, Tandil YL, T P C, Gupta A, Kalaria D, Kumar P - J Int Oral Health (2015)

Comparison of mean bond strength values of various etchants
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4588791&req=5

Figure 1: Comparison of mean bond strength values of various etchants
Mentions: The mean bond strength values of various etchants were phosphoric acid (22.35 MPa), single etch (Adper Prompt) (19.59 MPa), NRC (17.02 MPa), and the lowest by EDTA (14.02 MPa). (Table 1 and Graph 1).

Bottom Line: These etchants have been found to have shear bond strength comparable to phosphoric acid.In this study, indigenously prepared 24% ethylenediaminetetraacetic acid (EDTA) has been compared with established etchants, as to prove if their shear bond strength was closely related.Single etch followed by NRC has the second and third highest bond strength values, which are comparable to phosphoric acid.

View Article: PubMed Central - PubMed

Affiliation: Reader, Department of Pedodontics & Preventive Dentistry, Krishnadevaraya College of Dental Sciences, Bangalore, Karnataka, India.

ABSTRACT

Background: Over the years, it has been known that 34% phosphoric acid is the benchmark in etchants with the best shear bond strength shown with composites in primary teeth. However, with latest technological advancements and innovations, in order to reduce the number of steps and less damage to the tooth structure, non-rinse conditioner (NRC) & Single-Etch and various other etchants have been tried and tested. These etchants have been found to have shear bond strength comparable to phosphoric acid. In this study, indigenously prepared 24% ethylenediaminetetraacetic acid (EDTA) has been compared with established etchants, as to prove if their shear bond strength was closely related. As it is a well-known fact that EDTA could be less damaging to the enamel during etching and hence can be an alternative for etching of primary teeth.

Materials and methods: For the study 60 caries-free primary molars were used, they were sectioned in the middle, after making area for bonding; the marked area was then etched using different etchants for 30 s. Each of the teeth was then rinsed and bonded with composite resin and thermocycling was done. Shear bond strength testing was done on the composite using Universal Testing Machine.

Results: Results of the study showed that phosphoric acid showed the highest bond strength, closely followed by Single Etch (Adper Prompt) and NRC, then by EDTA.

Conclusions: About 24% EDTA can be another comparable replacement for phosphoric acid if used with a Single Etch Primer, like Prime and Bond NT on primary teeth. 34% phosphoric acid has the highest bond strength values with composite resin. Single etch followed by NRC has the second and third highest bond strength values, which are comparable to phosphoric acid.

No MeSH data available.


Related in: MedlinePlus