Limits...
Haemostatic agents on the shear bond strength of self-adhesive resin.

Anil A, Sekhar A, Thomas MS, Ginjupalli K - J Clin Exp Dent (2015)

Bottom Line: There was significant difference in the shear bond strength of control and tannic acid contaminated group (p<0.05), whereas there was no significant differences between the shear bond strength between control and aluminium chloride and ferric sulphate groups (p>0.05).As per the study Tannic acid significantly weakened the bond between the self-adhesive resin and dentin.Key words:Aluminium chloride, Ferric sulphate, haemostatic agent, self-adhesive resin cement, shear bond strength, Tannic acid.

View Article: PubMed Central - PubMed

Affiliation: Former Under Graduate student, Manipal College of Dental Sciences, Manipal University, Mangalore- 575001.

ABSTRACT

Background: Dentin surface contaminated with haemostatic agents can interfere with the bonding of self-adhesive resin cement. Therefore the purpose of this study was to evaluate the effect of various haemostatic agents such as Aluminium chloride, Ferric sulphate and Tannic acid on the shear bond strength of self-adhesive resin luting agent.

Material and methods: The buccal surfaces of extracted premolars were flattened to expose the dentine. The teeth were then randomly divided into four groups. In Group I Aluminium Chloride was applied on the flattened dentinal surface, in Group II Ferric Sulphate was applied to exposed dentin surface, in Group III tannic acid was applied on to the dentinal surface, and the control group, i.e. Group IV was rinsed with saline. After the surface treatment, all the teeth were air dried. Then a predetermined dimension of RelyX™ U200 self-adhesive resin cement was bonded to the pretreated dentin surfaces. The samples were then stored under 370C in distilled water for 24 hours under 100 % humidity. Following this each sample was tested for shear bond strength with an Instron testing machine at a crosshead speed of 1mm/min.

Results: There was significant difference in the shear bond strength of control and tannic acid contaminated group (p<0.05), whereas there was no significant differences between the shear bond strength between control and aluminium chloride and ferric sulphate groups (p>0.05).

Conclusions: The usage of haemostatic agent can negatively affect the bond strength of self-adhesive resin cement (Rely X) on to the dentin surface. As per the study Tannic acid significantly weakened the bond between the self-adhesive resin and dentin. Key words:Aluminium chloride, Ferric sulphate, haemostatic agent, self-adhesive resin cement, shear bond strength, Tannic acid.

No MeSH data available.


Graph representing the mean bond strength (in MPa) of self-adhesive resin cements in various groups.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4554233&req=5

Figure 3: Graph representing the mean bond strength (in MPa) of self-adhesive resin cements in various groups.

Mentions: The highest shear bond strength (SBS) of self-adhesive resin cement (SARC) was observed in the control group [12.18±3.90] and the least was observed in Group III, i.e. the Tannic acid group [6.57±4.15] (Fig. 3). Both these groups showed statistically significant difference (p<0.5) ( Table 2). Even though Group II (Aluminium chloride) [9.83±1.50] and Group III (Ferric sulphate) [8.27±4.36] showed reduced SBS as compared to the control, there was no statistically significant difference. Irrespective of the group all the samples showed adhesive failure ( Table 2).


Haemostatic agents on the shear bond strength of self-adhesive resin.

Anil A, Sekhar A, Thomas MS, Ginjupalli K - J Clin Exp Dent (2015)

Graph representing the mean bond strength (in MPa) of self-adhesive resin cements in various groups.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4554233&req=5

Figure 3: Graph representing the mean bond strength (in MPa) of self-adhesive resin cements in various groups.
Mentions: The highest shear bond strength (SBS) of self-adhesive resin cement (SARC) was observed in the control group [12.18±3.90] and the least was observed in Group III, i.e. the Tannic acid group [6.57±4.15] (Fig. 3). Both these groups showed statistically significant difference (p<0.5) ( Table 2). Even though Group II (Aluminium chloride) [9.83±1.50] and Group III (Ferric sulphate) [8.27±4.36] showed reduced SBS as compared to the control, there was no statistically significant difference. Irrespective of the group all the samples showed adhesive failure ( Table 2).

Bottom Line: There was significant difference in the shear bond strength of control and tannic acid contaminated group (p<0.05), whereas there was no significant differences between the shear bond strength between control and aluminium chloride and ferric sulphate groups (p>0.05).As per the study Tannic acid significantly weakened the bond between the self-adhesive resin and dentin.Key words:Aluminium chloride, Ferric sulphate, haemostatic agent, self-adhesive resin cement, shear bond strength, Tannic acid.

View Article: PubMed Central - PubMed

Affiliation: Former Under Graduate student, Manipal College of Dental Sciences, Manipal University, Mangalore- 575001.

ABSTRACT

Background: Dentin surface contaminated with haemostatic agents can interfere with the bonding of self-adhesive resin cement. Therefore the purpose of this study was to evaluate the effect of various haemostatic agents such as Aluminium chloride, Ferric sulphate and Tannic acid on the shear bond strength of self-adhesive resin luting agent.

Material and methods: The buccal surfaces of extracted premolars were flattened to expose the dentine. The teeth were then randomly divided into four groups. In Group I Aluminium Chloride was applied on the flattened dentinal surface, in Group II Ferric Sulphate was applied to exposed dentin surface, in Group III tannic acid was applied on to the dentinal surface, and the control group, i.e. Group IV was rinsed with saline. After the surface treatment, all the teeth were air dried. Then a predetermined dimension of RelyX™ U200 self-adhesive resin cement was bonded to the pretreated dentin surfaces. The samples were then stored under 370C in distilled water for 24 hours under 100 % humidity. Following this each sample was tested for shear bond strength with an Instron testing machine at a crosshead speed of 1mm/min.

Results: There was significant difference in the shear bond strength of control and tannic acid contaminated group (p<0.05), whereas there was no significant differences between the shear bond strength between control and aluminium chloride and ferric sulphate groups (p>0.05).

Conclusions: The usage of haemostatic agent can negatively affect the bond strength of self-adhesive resin cement (Rely X) on to the dentin surface. As per the study Tannic acid significantly weakened the bond between the self-adhesive resin and dentin. Key words:Aluminium chloride, Ferric sulphate, haemostatic agent, self-adhesive resin cement, shear bond strength, Tannic acid.

No MeSH data available.