Limits...
Design of a High-Performance Micro Integrated Surface Plasmon Resonance Sensor Based on Silicon-On-Insulator Rib Waveguide Array.

Yuan D, Dong Y, Liu Y, Li T - Sensors (Basel) (2015)

Bottom Line: As a typical example, a single bimetallic SPR sensor with 3 nm Au over 32 nm Al possesses a high sensitivity of 3.968 × 104 nm/RIU, a detection-accuracy of 14.7 μm(-1).For a uniparted SPR sensor, it can achieve a detection limit of 5.04 × 10(-7) RIU.With the relative power measurement accuracy of 0.01 dB, the refractive index variation of 1.14 × 10(-5) RIU can be detected by the SPR sensor array.

View Article: PubMed Central - PubMed

Affiliation: Graduate School at Shenzhen, Tsinghua University, J209A, Tsinghua Campus, University Town of Shenzhen, Shenzhen 518055, China. ydp12@mails.tsinghua.edu.cn.

ABSTRACT
Based on silicon-on-insulator (SOI) rib waveguide with large cross-section, a micro integrated surface plasmon resonance (SPR) biochemical sensor platform is proposed. SPR is excited at the deeply etched facet of the bend waveguide by the guiding mode and a bimetallic configuration is employed. With the advantages of SOI rib waveguide and the silicon microfabrication technology, an array of the SPR sensors can be composed to implement wavelength interrogation of the sensors' output signal, so the spectrometer or other bulky and expensive equipment are not necessary, which enables the SPR sensor to realize the miniaturization and integration of the entire sensing system. The performances of the SPR sensor element are verified by using the two-dimensional finite-different time-domain method. The parameters of the sensor element and the array are optimized for the achievement of high performance for biochemical sensing application. As a typical example, a single bimetallic SPR sensor with 3 nm Au over 32 nm Al possesses a high sensitivity of 3.968 × 104 nm/RIU, a detection-accuracy of 14.7 μm(-1). For a uniparted SPR sensor, it can achieve a detection limit of 5.04 × 10(-7) RIU. With the relative power measurement accuracy of 0.01 dB, the refractive index variation of 1.14 × 10(-5) RIU can be detected by the SPR sensor array.

No MeSH data available.


Related in: MedlinePlus

Schematic of SPR sensor array for wavelength interrogation.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4541936&req=5

sensors-15-17313-f012: Schematic of SPR sensor array for wavelength interrogation.

Mentions: Based on silicon microfabrication technology, an array can be used to implement the wavelength interrogation, as shown in Figure 12. Light with different wavelength from each element of the source array is coupled into the input waveguide of each element of the SPR sensor array through a standard single-mode fiber. A photodetector array is integrated at the end of the output waveguides and detects the output signal. For a set of operating wavelengths, the wavelength response of the SPR sensors can be obtained from the photodetector array, and the resonance wavelength of SPR can be determined, so the parameters of the analyte solution can be estimated.


Design of a High-Performance Micro Integrated Surface Plasmon Resonance Sensor Based on Silicon-On-Insulator Rib Waveguide Array.

Yuan D, Dong Y, Liu Y, Li T - Sensors (Basel) (2015)

Schematic of SPR sensor array for wavelength interrogation.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4541936&req=5

sensors-15-17313-f012: Schematic of SPR sensor array for wavelength interrogation.
Mentions: Based on silicon microfabrication technology, an array can be used to implement the wavelength interrogation, as shown in Figure 12. Light with different wavelength from each element of the source array is coupled into the input waveguide of each element of the SPR sensor array through a standard single-mode fiber. A photodetector array is integrated at the end of the output waveguides and detects the output signal. For a set of operating wavelengths, the wavelength response of the SPR sensors can be obtained from the photodetector array, and the resonance wavelength of SPR can be determined, so the parameters of the analyte solution can be estimated.

Bottom Line: As a typical example, a single bimetallic SPR sensor with 3 nm Au over 32 nm Al possesses a high sensitivity of 3.968 × 104 nm/RIU, a detection-accuracy of 14.7 μm(-1).For a uniparted SPR sensor, it can achieve a detection limit of 5.04 × 10(-7) RIU.With the relative power measurement accuracy of 0.01 dB, the refractive index variation of 1.14 × 10(-5) RIU can be detected by the SPR sensor array.

View Article: PubMed Central - PubMed

Affiliation: Graduate School at Shenzhen, Tsinghua University, J209A, Tsinghua Campus, University Town of Shenzhen, Shenzhen 518055, China. ydp12@mails.tsinghua.edu.cn.

ABSTRACT
Based on silicon-on-insulator (SOI) rib waveguide with large cross-section, a micro integrated surface plasmon resonance (SPR) biochemical sensor platform is proposed. SPR is excited at the deeply etched facet of the bend waveguide by the guiding mode and a bimetallic configuration is employed. With the advantages of SOI rib waveguide and the silicon microfabrication technology, an array of the SPR sensors can be composed to implement wavelength interrogation of the sensors' output signal, so the spectrometer or other bulky and expensive equipment are not necessary, which enables the SPR sensor to realize the miniaturization and integration of the entire sensing system. The performances of the SPR sensor element are verified by using the two-dimensional finite-different time-domain method. The parameters of the sensor element and the array are optimized for the achievement of high performance for biochemical sensing application. As a typical example, a single bimetallic SPR sensor with 3 nm Au over 32 nm Al possesses a high sensitivity of 3.968 × 104 nm/RIU, a detection-accuracy of 14.7 μm(-1). For a uniparted SPR sensor, it can achieve a detection limit of 5.04 × 10(-7) RIU. With the relative power measurement accuracy of 0.01 dB, the refractive index variation of 1.14 × 10(-5) RIU can be detected by the SPR sensor array.

No MeSH data available.


Related in: MedlinePlus