Limits...
Monocular Vision System for Fixed Altitude Flight of Unmanned Aerial Vehicles.

Huang KL, Chiu CC, Chiu SY, Teng YJ, Hao SS - Sensors (Basel) (2015)

Bottom Line: The UAV flight system can be set to fly at a fixed and relatively low altitude to obtain the same resolution of ground images.A forward-looking camera is mounted on the upside of the aircraft's nose.Experimental results show that the proposed system enables UAVs to obtain terrain images at constant resolution, and to detect the relative altitude along the flight path.

View Article: PubMed Central - PubMed

Affiliation: Department of Electrical and Electronic Engineering, Chung Cheng Institute of Technology, National Defense University, Taoyuan 33551, Taiwan. 1040510304@ndu.edu.tw.

ABSTRACT
The fastest and most economical method of acquiring terrain images is aerial photography. The use of unmanned aerial vehicles (UAVs) has been investigated for this task. However, UAVs present a range of challenges such as flight altitude maintenance. This paper reports a method that combines skyline detection with a stereo vision algorithm to enable the flight altitude of UAVs to be maintained. A monocular camera is mounted on the downside of the aircraft's nose to collect continuous ground images, and the relative altitude is obtained via a stereo vision algorithm from the velocity of the UAV. Image detection is used to obtain terrain images, and to measure the relative altitude from the ground to the UAV. The UAV flight system can be set to fly at a fixed and relatively low altitude to obtain the same resolution of ground images. A forward-looking camera is mounted on the upside of the aircraft's nose. In combination with the skyline detection algorithm, this helps the aircraft to maintain a stable flight pattern. Experimental results show that the proposed system enables UAVs to obtain terrain images at constant resolution, and to detect the relative altitude along the flight path.

No MeSH data available.


Related in: MedlinePlus

Flying direction changed by wind.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4541911&req=5

sensors-15-16848-f006: Flying direction changed by wind.

Mentions: The value Δd detected by the flying direction detection process is the magnitude of the motion vector along the direction of flight. The last unknown parameter is the baseline b. Because the wind could affect the flying direction and velocity, as shown in Figure 6, distance estimation between consecutive images is a difficult task.


Monocular Vision System for Fixed Altitude Flight of Unmanned Aerial Vehicles.

Huang KL, Chiu CC, Chiu SY, Teng YJ, Hao SS - Sensors (Basel) (2015)

Flying direction changed by wind.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4541911&req=5

sensors-15-16848-f006: Flying direction changed by wind.
Mentions: The value Δd detected by the flying direction detection process is the magnitude of the motion vector along the direction of flight. The last unknown parameter is the baseline b. Because the wind could affect the flying direction and velocity, as shown in Figure 6, distance estimation between consecutive images is a difficult task.

Bottom Line: The UAV flight system can be set to fly at a fixed and relatively low altitude to obtain the same resolution of ground images.A forward-looking camera is mounted on the upside of the aircraft's nose.Experimental results show that the proposed system enables UAVs to obtain terrain images at constant resolution, and to detect the relative altitude along the flight path.

View Article: PubMed Central - PubMed

Affiliation: Department of Electrical and Electronic Engineering, Chung Cheng Institute of Technology, National Defense University, Taoyuan 33551, Taiwan. 1040510304@ndu.edu.tw.

ABSTRACT
The fastest and most economical method of acquiring terrain images is aerial photography. The use of unmanned aerial vehicles (UAVs) has been investigated for this task. However, UAVs present a range of challenges such as flight altitude maintenance. This paper reports a method that combines skyline detection with a stereo vision algorithm to enable the flight altitude of UAVs to be maintained. A monocular camera is mounted on the downside of the aircraft's nose to collect continuous ground images, and the relative altitude is obtained via a stereo vision algorithm from the velocity of the UAV. Image detection is used to obtain terrain images, and to measure the relative altitude from the ground to the UAV. The UAV flight system can be set to fly at a fixed and relatively low altitude to obtain the same resolution of ground images. A forward-looking camera is mounted on the upside of the aircraft's nose. In combination with the skyline detection algorithm, this helps the aircraft to maintain a stable flight pattern. Experimental results show that the proposed system enables UAVs to obtain terrain images at constant resolution, and to detect the relative altitude along the flight path.

No MeSH data available.


Related in: MedlinePlus