Limits...
Using Wireless Sensor Networks and Trains as Data Mules to Monitor Slab Track Infrastructures.

Cañete E, Chen J, Díaz M, Llopis L, Reyna A, Rubio B - Sensors (Basel) (2015)

Bottom Line: Recently, slab track systems have arisen as a safer and more sustainable option for high speed railway infrastructures, compared to traditional ballasted tracks.The design of such systems has to deal with a scenario of large areas with inaccessible zones, where neither Internet coverage nor electricity supply is guaranteed.In addition, to ensure communication between the sensing devices and the train, the communication system must take into account parameters such as train speed, antenna coverage, band and frequency.

View Article: PubMed Central - PubMed

Affiliation: Department of Languages and Computer Science, University of Málaga, Boulevar Louis Pasteur 35, Málaga 29071, Spain. ecc@lcc.uma.es.

ABSTRACT
Recently, slab track systems have arisen as a safer and more sustainable option for high speed railway infrastructures, compared to traditional ballasted tracks. Integrating Wireless Sensor Networks within these infrastructures can provide structural health related data that can be used to evaluate their degradation and to not only detect failures but also to predict them. The design of such systems has to deal with a scenario of large areas with inaccessible zones, where neither Internet coverage nor electricity supply is guaranteed. In this paper we propose a monitoring system for slab track systems that measures vibrations and displacements in the track. Collected data is transmitted to passing trains, which are used as data mules to upload the information to a remote control center. On arrival at the station, the data is stored in a database, which is queried by an application in order to detect and predict failures. In this paper, different communication architectures are designed and tested to select the most suitable system meeting such requirements as efficiency, low cost and data accuracy. In addition, to ensure communication between the sensing devices and the train, the communication system must take into account parameters such as train speed, antenna coverage, band and frequency.

No MeSH data available.


Related in: MedlinePlus

868 MHz radios using groups: communication architecture.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4541823&req=5

sensors-15-15101-f008: 868 MHz radios using groups: communication architecture.

Mentions: The next architecture, shown in Figure 8, is based on the use of 868 MHz radio modules. The architecture is composed of groups controlled by a coordinator. Since the communication between 868 MHz modules does not require association, the same communication module can be used to communicate with the train and other nodes in the same monitoring group. However, there can be interferences between the groups and trains, especially if the monitoring group is densely deployed. To avoid this, during the transmission of information from the coordinator to the train, the remaining 868 modules in the group are set to sleep. The coordinator nodes are susceptible to interference between each other when they send information to the train and use the same channel.


Using Wireless Sensor Networks and Trains as Data Mules to Monitor Slab Track Infrastructures.

Cañete E, Chen J, Díaz M, Llopis L, Reyna A, Rubio B - Sensors (Basel) (2015)

868 MHz radios using groups: communication architecture.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4541823&req=5

sensors-15-15101-f008: 868 MHz radios using groups: communication architecture.
Mentions: The next architecture, shown in Figure 8, is based on the use of 868 MHz radio modules. The architecture is composed of groups controlled by a coordinator. Since the communication between 868 MHz modules does not require association, the same communication module can be used to communicate with the train and other nodes in the same monitoring group. However, there can be interferences between the groups and trains, especially if the monitoring group is densely deployed. To avoid this, during the transmission of information from the coordinator to the train, the remaining 868 modules in the group are set to sleep. The coordinator nodes are susceptible to interference between each other when they send information to the train and use the same channel.

Bottom Line: Recently, slab track systems have arisen as a safer and more sustainable option for high speed railway infrastructures, compared to traditional ballasted tracks.The design of such systems has to deal with a scenario of large areas with inaccessible zones, where neither Internet coverage nor electricity supply is guaranteed.In addition, to ensure communication between the sensing devices and the train, the communication system must take into account parameters such as train speed, antenna coverage, band and frequency.

View Article: PubMed Central - PubMed

Affiliation: Department of Languages and Computer Science, University of Málaga, Boulevar Louis Pasteur 35, Málaga 29071, Spain. ecc@lcc.uma.es.

ABSTRACT
Recently, slab track systems have arisen as a safer and more sustainable option for high speed railway infrastructures, compared to traditional ballasted tracks. Integrating Wireless Sensor Networks within these infrastructures can provide structural health related data that can be used to evaluate their degradation and to not only detect failures but also to predict them. The design of such systems has to deal with a scenario of large areas with inaccessible zones, where neither Internet coverage nor electricity supply is guaranteed. In this paper we propose a monitoring system for slab track systems that measures vibrations and displacements in the track. Collected data is transmitted to passing trains, which are used as data mules to upload the information to a remote control center. On arrival at the station, the data is stored in a database, which is queried by an application in order to detect and predict failures. In this paper, different communication architectures are designed and tested to select the most suitable system meeting such requirements as efficiency, low cost and data accuracy. In addition, to ensure communication between the sensing devices and the train, the communication system must take into account parameters such as train speed, antenna coverage, band and frequency.

No MeSH data available.


Related in: MedlinePlus