Limits...
Using K-Nearest Neighbor Classification to Diagnose Abnormal Lung Sounds.

Chen CH, Huang WT, Tan TH, Chang CC, Chang YJ - Sensors (Basel) (2015)

Bottom Line: The proposed system can also be used for home care: if the percentage of abnormal lung sound frames is > 30% of the whole test signal, the system can automatically warn the user to visit a physician for diagnosis.If an abnormal status is detected, the device will warn the user automatically.Experimental results indicated that the error in respiratory cycles between measured and actual values was only 6.8%, illustrating the potential of our detector for home care applications.

View Article: PubMed Central - PubMed

Affiliation: Department of Management Information Systems, Central Taiwan University of Science and Technology, Taichung 40601, Taiwan, China. chchen@ctust.edu.tw.

ABSTRACT
A reported 30% of people worldwide have abnormal lung sounds, including crackles, rhonchi, and wheezes. To date, the traditional stethoscope remains the most popular tool used by physicians to diagnose such abnormal lung sounds, however, many problems arise with the use of a stethoscope, including the effects of environmental noise, the inability to record and store lung sounds for follow-up or tracking, and the physician's subjective diagnostic experience. This study has developed a digital stethoscope to help physicians overcome these problems when diagnosing abnormal lung sounds. In this digital system, mel-frequency cepstral coefficients (MFCCs) were used to extract the features of lung sounds, and then the K-means algorithm was used for feature clustering, to reduce the amount of data for computation. Finally, the K-nearest neighbor method was used to classify the lung sounds. The proposed system can also be used for home care: if the percentage of abnormal lung sound frames is > 30% of the whole test signal, the system can automatically warn the user to visit a physician for diagnosis. We also used bend sensors together with an amplification circuit, Bluetooth, and a microcontroller to implement a respiration detector. The respiratory signal extracted by the bend sensors can be transmitted to the computer via Bluetooth to calculate the respiratory cycle, for real-time assessment. If an abnormal status is detected, the device will warn the user automatically. Experimental results indicated that the error in respiratory cycles between measured and actual values was only 6.8%, illustrating the potential of our detector for home care applications.

Show MeSH

Related in: MedlinePlus

Condenser microphone [21].
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4507578&req=5

sensors-15-13132-f007: Condenser microphone [21].

Mentions: The system integrates a traditional analog stethoscope and a condenser microphone to measure and record patient lung sound signals. To do this, we cut out a section of the Y-shaped hose and integrated the condenser microphone and stethoscope head. The microphone circuit was connected to the end of the hose by hot plastic, and wrapped with isolation sticky paper to fill the cracks (Figure 6). Figure 7 shows the implementation of the condenser microphone. The analog stethoscope measures lung sound signals, the stethoscope head collects the sounds, and the microphone records the sounds, which are transmitted to a PC for storage and playback.


Using K-Nearest Neighbor Classification to Diagnose Abnormal Lung Sounds.

Chen CH, Huang WT, Tan TH, Chang CC, Chang YJ - Sensors (Basel) (2015)

Condenser microphone [21].
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4507578&req=5

sensors-15-13132-f007: Condenser microphone [21].
Mentions: The system integrates a traditional analog stethoscope and a condenser microphone to measure and record patient lung sound signals. To do this, we cut out a section of the Y-shaped hose and integrated the condenser microphone and stethoscope head. The microphone circuit was connected to the end of the hose by hot plastic, and wrapped with isolation sticky paper to fill the cracks (Figure 6). Figure 7 shows the implementation of the condenser microphone. The analog stethoscope measures lung sound signals, the stethoscope head collects the sounds, and the microphone records the sounds, which are transmitted to a PC for storage and playback.

Bottom Line: The proposed system can also be used for home care: if the percentage of abnormal lung sound frames is > 30% of the whole test signal, the system can automatically warn the user to visit a physician for diagnosis.If an abnormal status is detected, the device will warn the user automatically.Experimental results indicated that the error in respiratory cycles between measured and actual values was only 6.8%, illustrating the potential of our detector for home care applications.

View Article: PubMed Central - PubMed

Affiliation: Department of Management Information Systems, Central Taiwan University of Science and Technology, Taichung 40601, Taiwan, China. chchen@ctust.edu.tw.

ABSTRACT
A reported 30% of people worldwide have abnormal lung sounds, including crackles, rhonchi, and wheezes. To date, the traditional stethoscope remains the most popular tool used by physicians to diagnose such abnormal lung sounds, however, many problems arise with the use of a stethoscope, including the effects of environmental noise, the inability to record and store lung sounds for follow-up or tracking, and the physician's subjective diagnostic experience. This study has developed a digital stethoscope to help physicians overcome these problems when diagnosing abnormal lung sounds. In this digital system, mel-frequency cepstral coefficients (MFCCs) were used to extract the features of lung sounds, and then the K-means algorithm was used for feature clustering, to reduce the amount of data for computation. Finally, the K-nearest neighbor method was used to classify the lung sounds. The proposed system can also be used for home care: if the percentage of abnormal lung sound frames is > 30% of the whole test signal, the system can automatically warn the user to visit a physician for diagnosis. We also used bend sensors together with an amplification circuit, Bluetooth, and a microcontroller to implement a respiration detector. The respiratory signal extracted by the bend sensors can be transmitted to the computer via Bluetooth to calculate the respiratory cycle, for real-time assessment. If an abnormal status is detected, the device will warn the user automatically. Experimental results indicated that the error in respiratory cycles between measured and actual values was only 6.8%, illustrating the potential of our detector for home care applications.

Show MeSH
Related in: MedlinePlus