Limits...
The Influence of Casing-Sand Adhesion on Cementing Bond Strength.

Zhao X, Guan Z, Xu M, Shi Y, Liao H, Sun J - PLoS ONE (2015)

Bottom Line: However, due to the lack of detailed study of the technique, many questions remain.The priority orders of key factors are: sand grain size, sand coverage, adhesive curing temperature and adhesive curing time.The optimal parameters recommended for application are: 1.6mm~1.9mm sand grain size, 60%~70% sand coverage, 30°C curing temperature and 60 hours curing time.

View Article: PubMed Central - PubMed

Affiliation: College of Petroleum Engineering, China University of Petroleum, Qingdao, Shandong, China.

ABSTRACT
In the petroleum industry, one of the most serious problems encountered during cementing is the failure at the bonding interface. Many measures including casing-sand adhesion have been developed to improve cementing bond strength. However, due to the lack of detailed study of the technique, many questions remain. The primary goal of this study is to investigate the influence of casing-sand adhesion on cementing bond strength, and to optimize parameters. An orthogonal experiment and a supplementary experiment were conducted. The results indicated that casing-sand adhesion can improve the cementing bond strength. The priority orders of key factors are: sand grain size, sand coverage, adhesive curing temperature and adhesive curing time. The optimal parameters recommended for application are: 1.6mm~1.9mm sand grain size, 60%~70% sand coverage, 30°C curing temperature and 60 hours curing time.

No MeSH data available.


Related in: MedlinePlus

The relationship between sand coverage and interfacial shear strength.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4482754&req=5

pone.0130892.g010: The relationship between sand coverage and interfacial shear strength.

Mentions: Fig 10 shows the relationship between sand coverage and interfacial shear strength. As shown in Fig 10, interfacial shear strength increases as sand coverage grows and reaches the maximum at data point of 60%~70%, then declines as the sand coverage continues to increase. So we conclude that the interfacial shear strength is not optimal, no matter the sand coverage is too big or small, the casing-sand adhesion would get a better cementing bond quality just when the sand coverage is appropriate.


The Influence of Casing-Sand Adhesion on Cementing Bond Strength.

Zhao X, Guan Z, Xu M, Shi Y, Liao H, Sun J - PLoS ONE (2015)

The relationship between sand coverage and interfacial shear strength.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4482754&req=5

pone.0130892.g010: The relationship between sand coverage and interfacial shear strength.
Mentions: Fig 10 shows the relationship between sand coverage and interfacial shear strength. As shown in Fig 10, interfacial shear strength increases as sand coverage grows and reaches the maximum at data point of 60%~70%, then declines as the sand coverage continues to increase. So we conclude that the interfacial shear strength is not optimal, no matter the sand coverage is too big or small, the casing-sand adhesion would get a better cementing bond quality just when the sand coverage is appropriate.

Bottom Line: However, due to the lack of detailed study of the technique, many questions remain.The priority orders of key factors are: sand grain size, sand coverage, adhesive curing temperature and adhesive curing time.The optimal parameters recommended for application are: 1.6mm~1.9mm sand grain size, 60%~70% sand coverage, 30°C curing temperature and 60 hours curing time.

View Article: PubMed Central - PubMed

Affiliation: College of Petroleum Engineering, China University of Petroleum, Qingdao, Shandong, China.

ABSTRACT
In the petroleum industry, one of the most serious problems encountered during cementing is the failure at the bonding interface. Many measures including casing-sand adhesion have been developed to improve cementing bond strength. However, due to the lack of detailed study of the technique, many questions remain. The primary goal of this study is to investigate the influence of casing-sand adhesion on cementing bond strength, and to optimize parameters. An orthogonal experiment and a supplementary experiment were conducted. The results indicated that casing-sand adhesion can improve the cementing bond strength. The priority orders of key factors are: sand grain size, sand coverage, adhesive curing temperature and adhesive curing time. The optimal parameters recommended for application are: 1.6mm~1.9mm sand grain size, 60%~70% sand coverage, 30°C curing temperature and 60 hours curing time.

No MeSH data available.


Related in: MedlinePlus