Limits...
A Practical Torque Estimation Method for Interior Permanent Magnet Synchronous Machine in Electric Vehicles.

Wu Z, Lu K, Zhu Y - PLoS ONE (2015)

Bottom Line: The torque output accuracy of the IPMSM in electric vehicles using a state of the art MTPA strategy highly depends on the accuracy of machine parameters, thus, a torque estimation method is necessary for the safety of the vehicle.Moreover, by taking into account the non-ideal characteristic of the inverter, the torque estimation accuracy is improved significantly.The effectiveness of the proposed method is demonstrated through MATLAB/Simulink simulation and experiment.

View Article: PubMed Central - PubMed

Affiliation: School of Automotive Engineering, Tongji University, Shanghai, China; Sino-German School for Postgraduate Studies, Tongji University, Shanghai, China.

ABSTRACT
The torque output accuracy of the IPMSM in electric vehicles using a state of the art MTPA strategy highly depends on the accuracy of machine parameters, thus, a torque estimation method is necessary for the safety of the vehicle. In this paper, a torque estimation method based on flux estimator with a modified low pass filter is presented. Moreover, by taking into account the non-ideal characteristic of the inverter, the torque estimation accuracy is improved significantly. The effectiveness of the proposed method is demonstrated through MATLAB/Simulink simulation and experiment.

No MeSH data available.


Torque Estimation Results at 600rpm with a Measured Torque of 100Nm.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC4482678&req=5

pone.0130923.g010: Torque Estimation Results at 600rpm with a Measured Torque of 100Nm.

Mentions: Fig 10 shows the torque estimation results at 600rpm with a measured torque of 100Nm. And the average errors of the proposed method and the second method are 1Nm and 34Nm respectively. And the result of the third method is not stable.


A Practical Torque Estimation Method for Interior Permanent Magnet Synchronous Machine in Electric Vehicles.

Wu Z, Lu K, Zhu Y - PLoS ONE (2015)

Torque Estimation Results at 600rpm with a Measured Torque of 100Nm.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC4482678&req=5

pone.0130923.g010: Torque Estimation Results at 600rpm with a Measured Torque of 100Nm.
Mentions: Fig 10 shows the torque estimation results at 600rpm with a measured torque of 100Nm. And the average errors of the proposed method and the second method are 1Nm and 34Nm respectively. And the result of the third method is not stable.

Bottom Line: The torque output accuracy of the IPMSM in electric vehicles using a state of the art MTPA strategy highly depends on the accuracy of machine parameters, thus, a torque estimation method is necessary for the safety of the vehicle.Moreover, by taking into account the non-ideal characteristic of the inverter, the torque estimation accuracy is improved significantly.The effectiveness of the proposed method is demonstrated through MATLAB/Simulink simulation and experiment.

View Article: PubMed Central - PubMed

Affiliation: School of Automotive Engineering, Tongji University, Shanghai, China; Sino-German School for Postgraduate Studies, Tongji University, Shanghai, China.

ABSTRACT
The torque output accuracy of the IPMSM in electric vehicles using a state of the art MTPA strategy highly depends on the accuracy of machine parameters, thus, a torque estimation method is necessary for the safety of the vehicle. In this paper, a torque estimation method based on flux estimator with a modified low pass filter is presented. Moreover, by taking into account the non-ideal characteristic of the inverter, the torque estimation accuracy is improved significantly. The effectiveness of the proposed method is demonstrated through MATLAB/Simulink simulation and experiment.

No MeSH data available.