Limits...
Design and user evaluation of a wheelchair mounted robotic assisted transfer device.

Grindle GG, Wang H, Jeannis H, Teodorski E, Cooper RA - Biomed Res Int (2015)

Bottom Line: The prototype was presented to a group of 16 end users and feedback on the device was obtained via a survey and group discussion.Thirteen out of sixteen (83%) participants agreed that it was important to develop this type of technology.Participants in this study suggested that they would be accepting the use of robotic technology for transfers and a majority did not feel that they would be embarrassed to use this technology.

View Article: PubMed Central - PubMed

Affiliation: Human Engineering Research Laboratories, VA Pittsburgh Healthcare System, 6425 Penn Avenue, Suite 400, Pittsburgh, PA 15232, USA ; Department of Rehabilitation Science and Technology, University of Pittsburgh, 6425 Penn Avenue, Suite 400, Pittsburgh, PA 15232, USA.

ABSTRACT

Purpose: The aim of this study is to describe the robotic assisted transfer device (RATD) and an initial focus group evaluation by end users. The purpose of the device is to aid in the transfers of people with disabilities to and from their electric powered wheelchair (EPW) onto other surfaces. The device can be used for both stand-pivot transfers and fully dependent transfers, where the person being transferred is in a sling and weight is fully on the robot. The RATD is fixed to an EPW to allow for its use in community settings.

Method: A functional prototype of the RATD was designed and fabricated. The prototype was presented to a group of 16 end users and feedback on the device was obtained via a survey and group discussion.

Results: Thirteen out of sixteen (83%) participants agreed that it was important to develop this type of technology. They also indicated that user, caregiver, and robotic controls were important features to be included in the device.

Conclusions: Participants in this study suggested that they would be accepting the use of robotic technology for transfers and a majority did not feel that they would be embarrassed to use this technology.

Show MeSH
A sequence of photographs of the RATD being used to transfer a person from an electric powered wheelchair to a mat table, by a caregiver.
© Copyright Policy - open-access
Related In: Results  -  Collection


getmorefigures.php?uid=PMC4352417&req=5

fig5: A sequence of photographs of the RATD being used to transfer a person from an electric powered wheelchair to a mat table, by a caregiver.

Mentions: Figure 5 shows a sequence of photographs that demonstrate a caregiver using the RATD to transfer a wheelchair user from an EPW to a mat table. The RATD was able to perform all the transfers during the demonstration protocol.


Design and user evaluation of a wheelchair mounted robotic assisted transfer device.

Grindle GG, Wang H, Jeannis H, Teodorski E, Cooper RA - Biomed Res Int (2015)

A sequence of photographs of the RATD being used to transfer a person from an electric powered wheelchair to a mat table, by a caregiver.
© Copyright Policy - open-access
Related In: Results  -  Collection

Show All Figures
getmorefigures.php?uid=PMC4352417&req=5

fig5: A sequence of photographs of the RATD being used to transfer a person from an electric powered wheelchair to a mat table, by a caregiver.
Mentions: Figure 5 shows a sequence of photographs that demonstrate a caregiver using the RATD to transfer a wheelchair user from an EPW to a mat table. The RATD was able to perform all the transfers during the demonstration protocol.

Bottom Line: The prototype was presented to a group of 16 end users and feedback on the device was obtained via a survey and group discussion.Thirteen out of sixteen (83%) participants agreed that it was important to develop this type of technology.Participants in this study suggested that they would be accepting the use of robotic technology for transfers and a majority did not feel that they would be embarrassed to use this technology.

View Article: PubMed Central - PubMed

Affiliation: Human Engineering Research Laboratories, VA Pittsburgh Healthcare System, 6425 Penn Avenue, Suite 400, Pittsburgh, PA 15232, USA ; Department of Rehabilitation Science and Technology, University of Pittsburgh, 6425 Penn Avenue, Suite 400, Pittsburgh, PA 15232, USA.

ABSTRACT

Purpose: The aim of this study is to describe the robotic assisted transfer device (RATD) and an initial focus group evaluation by end users. The purpose of the device is to aid in the transfers of people with disabilities to and from their electric powered wheelchair (EPW) onto other surfaces. The device can be used for both stand-pivot transfers and fully dependent transfers, where the person being transferred is in a sling and weight is fully on the robot. The RATD is fixed to an EPW to allow for its use in community settings.

Method: A functional prototype of the RATD was designed and fabricated. The prototype was presented to a group of 16 end users and feedback on the device was obtained via a survey and group discussion.

Results: Thirteen out of sixteen (83%) participants agreed that it was important to develop this type of technology. They also indicated that user, caregiver, and robotic controls were important features to be included in the device.

Conclusions: Participants in this study suggested that they would be accepting the use of robotic technology for transfers and a majority did not feel that they would be embarrassed to use this technology.

Show MeSH