Limits...
Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5.

Sharmin N, Parsons AJ, Rudd CD, Ahmed I - J Biomater Appl (2014)

Bottom Line: The mechanical properties of the fibres were found to significantly increase with increasing B2O3 content.Initial loss of mechanical properties due to annealing was found to be recovered with degradation.Both annealed and non-annealed fibres exhibited a peeling effect of the fibre's outer layer during degradation.

View Article: PubMed Central - PubMed

Affiliation: Division of Materials, Mechanics and Structures, University of Nottingham, Nottingham, UK.

Show MeSH

Related in: MedlinePlus

Effect of annealing on the density of fibres in the glass system P40Ca16Mg24Na(20 − X)Bx P45Ca16Mg24Na(15 − X)Bx and P50Ca16Mg24Na(10 − X)Bx (where x = 0, 5 and 10 mol%). Error bars represent the standard deviation where n = 20.
© Copyright Policy - open-access
Related In: Results  -  Collection

License 1 - License 2 - License 3
getmorefigures.php?uid=PMC4230965&req=5

fig3-0885328214539824: Effect of annealing on the density of fibres in the glass system P40Ca16Mg24Na(20 − X)Bx P45Ca16Mg24Na(15 − X)Bx and P50Ca16Mg24Na(10 − X)Bx (where x = 0, 5 and 10 mol%). Error bars represent the standard deviation where n = 20.

Mentions: The effect of annealing on the density of the fibres was also evaluated (Figure 3). It was found that the density of the annealed fibres was significantly (P < 0.001) higher than the non-annealed ones.Figure 3.


Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5.

Sharmin N, Parsons AJ, Rudd CD, Ahmed I - J Biomater Appl (2014)

Effect of annealing on the density of fibres in the glass system P40Ca16Mg24Na(20 − X)Bx P45Ca16Mg24Na(15 − X)Bx and P50Ca16Mg24Na(10 − X)Bx (where x = 0, 5 and 10 mol%). Error bars represent the standard deviation where n = 20.
© Copyright Policy - open-access
Related In: Results  -  Collection

License 1 - License 2 - License 3
Show All Figures
getmorefigures.php?uid=PMC4230965&req=5

fig3-0885328214539824: Effect of annealing on the density of fibres in the glass system P40Ca16Mg24Na(20 − X)Bx P45Ca16Mg24Na(15 − X)Bx and P50Ca16Mg24Na(10 − X)Bx (where x = 0, 5 and 10 mol%). Error bars represent the standard deviation where n = 20.
Mentions: The effect of annealing on the density of the fibres was also evaluated (Figure 3). It was found that the density of the annealed fibres was significantly (P < 0.001) higher than the non-annealed ones.Figure 3.

Bottom Line: The mechanical properties of the fibres were found to significantly increase with increasing B2O3 content.Initial loss of mechanical properties due to annealing was found to be recovered with degradation.Both annealed and non-annealed fibres exhibited a peeling effect of the fibre's outer layer during degradation.

View Article: PubMed Central - PubMed

Affiliation: Division of Materials, Mechanics and Structures, University of Nottingham, Nottingham, UK.

Show MeSH
Related in: MedlinePlus