Limits...
Intelligent Fiber Optic Sensor for Estimating the Concentration of a Mixture-Design and Working Principle

View Article: PubMed Central

ABSTRACT

This paper presents the construction and working principles of an intelligent fiber-optic intensity sensor used for examining the concentration of a mixture in conjunction with water. It can find applications e.g. in waste-water treatment plant for selection of a treatment process. The sensor head is the end of a large core polymer optical fiber, which constitutes one arm of an asymmetrical coupler. The head works on the reflection intensity basis. The reflected signal level depends on the Fresnel reflection from the air and from the mixture examined when the head is immersed in it. The sensor head is mounted on a lift. For detection purposes the signal can be measured on head submerging, submersion, emerging and emergence. Therefore, the measured signal depends on the surface tension, viscosity, turbidity and refraction coefficient of the solution. The signal coming from the head is processed electrically in an opto-electronic interface. Then it is fed to a neural network. The novelty of the proposed sensor lies in that it contains an asymmetrical coupler and a neural network that works in the generalization mode. The sensor resolution depends on the efficiency of the asymmetrical coupler, the precision of the opto-electronic signal conversion and the learning accuracy of the neural network. Therefore, the number and quality of the points used for the learning process is very important. By way of example, the paper describes a sensor intended for examining the concentration of liquid soap in water.

No MeSH data available.


Signal received from the head when monitoring the concentration of liquid soap diluted in water.
© Copyright Policy
Related In: Results  -  Collection


getmorefigures.php?uid=PMC3756727&req=5

f13-sensors-07-00384: Signal received from the head when monitoring the concentration of liquid soap diluted in water.

Mentions: During the experiment the head was subjected to a three-step washing process: flannel dampened in a water wipe, a dry lint-free kim wipe and a lint-free kim dampened in a methanol wipe. The sensor has been tested in room temperature (19-23C) and under atmospheric pressure. The samples of mixture were prepared with an electromagnetic rabble. Under these conditions, the measured characteristics were reproducible, (Figure 12 and 13).


Intelligent Fiber Optic Sensor for Estimating the Concentration of a Mixture-Design and Working Principle
Signal received from the head when monitoring the concentration of liquid soap diluted in water.
© Copyright Policy
Related In: Results  -  Collection

Show All Figures
getmorefigures.php?uid=PMC3756727&req=5

f13-sensors-07-00384: Signal received from the head when monitoring the concentration of liquid soap diluted in water.
Mentions: During the experiment the head was subjected to a three-step washing process: flannel dampened in a water wipe, a dry lint-free kim wipe and a lint-free kim dampened in a methanol wipe. The sensor has been tested in room temperature (19-23C) and under atmospheric pressure. The samples of mixture were prepared with an electromagnetic rabble. Under these conditions, the measured characteristics were reproducible, (Figure 12 and 13).

View Article: PubMed Central

ABSTRACT

This paper presents the construction and working principles of an intelligent fiber-optic intensity sensor used for examining the concentration of a mixture in conjunction with water. It can find applications e.g. in waste-water treatment plant for selection of a treatment process. The sensor head is the end of a large core polymer optical fiber, which constitutes one arm of an asymmetrical coupler. The head works on the reflection intensity basis. The reflected signal level depends on the Fresnel reflection from the air and from the mixture examined when the head is immersed in it. The sensor head is mounted on a lift. For detection purposes the signal can be measured on head submerging, submersion, emerging and emergence. Therefore, the measured signal depends on the surface tension, viscosity, turbidity and refraction coefficient of the solution. The signal coming from the head is processed electrically in an opto-electronic interface. Then it is fed to a neural network. The novelty of the proposed sensor lies in that it contains an asymmetrical coupler and a neural network that works in the generalization mode. The sensor resolution depends on the efficiency of the asymmetrical coupler, the precision of the opto-electronic signal conversion and the learning accuracy of the neural network. Therefore, the number and quality of the points used for the learning process is very important. By way of example, the paper describes a sensor intended for examining the concentration of liquid soap in water.

No MeSH data available.