Limits...
A novel approach to fabricate silk nanofibers containing hydroxyapatite nanoparticles using a three-way stopcock connector.

Sheikh FA, Ju HW, Moon BM, Park HJ, Kim JH, Lee OJ, Park CH - Nanoscale Res Lett (2013)

Bottom Line: In this work, we had successfully used a three-way stopcock connector to mix the two different solutions, and very shortly, this solution is ejected out to form nanofibers due to electric fields.Different blend ratios consisting HAp NPs had been electrospun into nanofibers.These characterization techniques revealed that HAp NPs can be easily introduced in silk nanofibers using a stopcock connector, and this method favorably preserves the intact nature of silk fibroin and HAp NPs.

View Article: PubMed Central - HTML - PubMed

Affiliation: Nano-Bio Regenerative Medical Institute, College of Medicine, Hallym University, Chuncheon 200-702, South Korea ; Department of Chemistry, University of Texas-Pan American, Edinburg, Texas 78539, USA.

ABSTRACT
Electrospinning technique is commonly used to produce micro- and/or nanofibers, which utilizes electrical forces to produce polymeric fibers with diameters ranging from several micrometers down to few nanometers. Desirably, electrospun materials provide highly porous structure and appropriate pore size for initial cell attachment and proliferation and thereby enable the exchange of nutrients. Composite nanofibers consisting of silk and hydroxyapatite nanoparticles (HAp) (NPs) had been considered as an excellent choice due to their efficient biocompatibility and bone-mimicking properties. To prepare these nanofiber composites, it requires the use of acidic solutions which have serious consequences on the nature of both silk and HAp NPs. It is ideal to create these nanofibers using aqueous solutions in which the physicochemical nature of both materials can be retained. However, to create those nanofibers is often difficult to obtain because of the fact that aqueous solutions of silk and HAp NPs can precipitate before they can be ejected into fibers during the electrospinning process. In this work, we had successfully used a three-way stopcock connector to mix the two different solutions, and very shortly, this solution is ejected out to form nanofibers due to electric fields. Different blend ratios consisting HAp NPs had been electrospun into nanofibers. The physicochemical aspects of fabricated nanofiber had been characterized by different state of techniques like that of FE-SEM, EDS, TEM, TEM-EDS, TGA, FT-IR, and XRD. These characterization techniques revealed that HAp NPs can be easily introduced in silk nanofibers using a stopcock connector, and this method favorably preserves the intact nature of silk fibroin and HAp NPs. Moreover, nanofibers obtained by this strategy were tested for cell toxicity and cell attachment studies using NIH 3 T3 fibroblasts which indicated non-toxic behavior and good attachment of cells upon incubation in the presence of nanofibers.

No MeSH data available.


Related in: MedlinePlus

MTT assay results revealing cell viability after culturing the NIH 3 T3 fibroblasts in the presence of nanofibers.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3750300&req=5

Figure 14: MTT assay results revealing cell viability after culturing the NIH 3 T3 fibroblasts in the presence of nanofibers.

Mentions: Figure 14 represents the results obtained from MTT assay. In this figure, it can be observed that all the nanofiber combinations show the logarithmic phase of growth as the days of incubation pass (i.e., 1, 2, and 3 days). Moreover, the cell viability of nanofibers modified with HAp showed an increase in the growth as the concentration of HAp is increased. These results further suggest that used HAp NPs are non-toxic to cells, and there is a considerable positive impact induced by HAp NPs.


A novel approach to fabricate silk nanofibers containing hydroxyapatite nanoparticles using a three-way stopcock connector.

Sheikh FA, Ju HW, Moon BM, Park HJ, Kim JH, Lee OJ, Park CH - Nanoscale Res Lett (2013)

MTT assay results revealing cell viability after culturing the NIH 3 T3 fibroblasts in the presence of nanofibers.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3750300&req=5

Figure 14: MTT assay results revealing cell viability after culturing the NIH 3 T3 fibroblasts in the presence of nanofibers.
Mentions: Figure 14 represents the results obtained from MTT assay. In this figure, it can be observed that all the nanofiber combinations show the logarithmic phase of growth as the days of incubation pass (i.e., 1, 2, and 3 days). Moreover, the cell viability of nanofibers modified with HAp showed an increase in the growth as the concentration of HAp is increased. These results further suggest that used HAp NPs are non-toxic to cells, and there is a considerable positive impact induced by HAp NPs.

Bottom Line: In this work, we had successfully used a three-way stopcock connector to mix the two different solutions, and very shortly, this solution is ejected out to form nanofibers due to electric fields.Different blend ratios consisting HAp NPs had been electrospun into nanofibers.These characterization techniques revealed that HAp NPs can be easily introduced in silk nanofibers using a stopcock connector, and this method favorably preserves the intact nature of silk fibroin and HAp NPs.

View Article: PubMed Central - HTML - PubMed

Affiliation: Nano-Bio Regenerative Medical Institute, College of Medicine, Hallym University, Chuncheon 200-702, South Korea ; Department of Chemistry, University of Texas-Pan American, Edinburg, Texas 78539, USA.

ABSTRACT
Electrospinning technique is commonly used to produce micro- and/or nanofibers, which utilizes electrical forces to produce polymeric fibers with diameters ranging from several micrometers down to few nanometers. Desirably, electrospun materials provide highly porous structure and appropriate pore size for initial cell attachment and proliferation and thereby enable the exchange of nutrients. Composite nanofibers consisting of silk and hydroxyapatite nanoparticles (HAp) (NPs) had been considered as an excellent choice due to their efficient biocompatibility and bone-mimicking properties. To prepare these nanofiber composites, it requires the use of acidic solutions which have serious consequences on the nature of both silk and HAp NPs. It is ideal to create these nanofibers using aqueous solutions in which the physicochemical nature of both materials can be retained. However, to create those nanofibers is often difficult to obtain because of the fact that aqueous solutions of silk and HAp NPs can precipitate before they can be ejected into fibers during the electrospinning process. In this work, we had successfully used a three-way stopcock connector to mix the two different solutions, and very shortly, this solution is ejected out to form nanofibers due to electric fields. Different blend ratios consisting HAp NPs had been electrospun into nanofibers. The physicochemical aspects of fabricated nanofiber had been characterized by different state of techniques like that of FE-SEM, EDS, TEM, TEM-EDS, TGA, FT-IR, and XRD. These characterization techniques revealed that HAp NPs can be easily introduced in silk nanofibers using a stopcock connector, and this method favorably preserves the intact nature of silk fibroin and HAp NPs. Moreover, nanofibers obtained by this strategy were tested for cell toxicity and cell attachment studies using NIH 3 T3 fibroblasts which indicated non-toxic behavior and good attachment of cells upon incubation in the presence of nanofibers.

No MeSH data available.


Related in: MedlinePlus