Limits...
A linear, millimetre displacement-to-frequency transducer.

Agee JT, Petto FK - Sensors (Basel) (2012)

Bottom Line: Experimental results confirm that a displacement of 0-100 mm is converted into a frequency range of 0-100 kHz, with a normalised fidelity factor of 99.91%, and a worst-case nonlinearity of less than 0.08%.Tests using laboratory standards show that a displacement of 10 mm is transduced with an accuracy of ± 0.6%, and a standard deviation of 530 Hz.Estimates included in the paper show that the transducer could cost less than 1% of existing systems for millimeter displacement measurement.

View Article: PubMed Central - PubMed

Affiliation: Department of Electrical Engineering, Tshwane University of Technology, Private Bag X680, Pretoria 0001, South Africa. ageejt@tut.ac.za

ABSTRACT
The paper presents a novel linear, high-fidelity millimetre displacement-to-frequency transducer, based on the resistive conversion of displacement into a proportional voltage, and then frequency. The derivation of the nonlinearity, fidelity and sensitivity of the transducer is presented. Experimental results confirm that a displacement of 0-100 mm is converted into a frequency range of 0-100 kHz, with a normalised fidelity factor of 99.91%, and a worst-case nonlinearity of less than 0.08%. Tests using laboratory standards show that a displacement of 10 mm is transduced with an accuracy of ± 0.6%, and a standard deviation of 530 Hz. Estimates included in the paper show that the transducer could cost less than 1% of existing systems for millimeter displacement measurement.

No MeSH data available.


Fidelity of primary voltage conditioning amplifier.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3472859&req=5

f4-sensors-12-10820: Fidelity of primary voltage conditioning amplifier.

Mentions: MATLAB simulation of the transducer fidelity, sensitivity and nonlinearity, based on Equations (9), (12) and (15) is presented in Figures 4–6.


A linear, millimetre displacement-to-frequency transducer.

Agee JT, Petto FK - Sensors (Basel) (2012)

Fidelity of primary voltage conditioning amplifier.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3472859&req=5

f4-sensors-12-10820: Fidelity of primary voltage conditioning amplifier.
Mentions: MATLAB simulation of the transducer fidelity, sensitivity and nonlinearity, based on Equations (9), (12) and (15) is presented in Figures 4–6.

Bottom Line: Experimental results confirm that a displacement of 0-100 mm is converted into a frequency range of 0-100 kHz, with a normalised fidelity factor of 99.91%, and a worst-case nonlinearity of less than 0.08%.Tests using laboratory standards show that a displacement of 10 mm is transduced with an accuracy of ± 0.6%, and a standard deviation of 530 Hz.Estimates included in the paper show that the transducer could cost less than 1% of existing systems for millimeter displacement measurement.

View Article: PubMed Central - PubMed

Affiliation: Department of Electrical Engineering, Tshwane University of Technology, Private Bag X680, Pretoria 0001, South Africa. ageejt@tut.ac.za

ABSTRACT
The paper presents a novel linear, high-fidelity millimetre displacement-to-frequency transducer, based on the resistive conversion of displacement into a proportional voltage, and then frequency. The derivation of the nonlinearity, fidelity and sensitivity of the transducer is presented. Experimental results confirm that a displacement of 0-100 mm is converted into a frequency range of 0-100 kHz, with a normalised fidelity factor of 99.91%, and a worst-case nonlinearity of less than 0.08%. Tests using laboratory standards show that a displacement of 10 mm is transduced with an accuracy of ± 0.6%, and a standard deviation of 530 Hz. Estimates included in the paper show that the transducer could cost less than 1% of existing systems for millimeter displacement measurement.

No MeSH data available.