Limits...
A wireless magnetic resonance energy transfer system for micro implantable medical sensors.

Li X, Zhang H, Peng F, Li Y, Yang T, Wang B, Fang D - Sensors (Basel) (2012)

Bottom Line: The energy transfer efficiency of the four-coil system is greatly improved compared to the conventional two-coil system.In addition, the output current varies with changes in the distance.The whole implanted part is packaged with PDMS of excellent biocompatibility and the volume of it is about 1 cm(3).

View Article: PubMed Central - PubMed

Affiliation: School of Electronics and Information Engineering, Beijing Jiaotong University, Beijing 100044, China. lixiuhan@bjtu.edu.cn

ABSTRACT
Based on the magnetic resonance coupling principle, in this paper a wireless energy transfer system is designed and implemented for the power supply of micro-implantable medical sensors. The entire system is composed of the in vitro part, including the energy transmitting circuit and resonant transmitter coils, and in vivo part, including the micro resonant receiver coils and signal shaping chip which includes the rectifier module and LDO voltage regulator module. Transmitter and receiver coils are wound by Litz wire, and the diameter of the receiver coils is just 1.9 cm. The energy transfer efficiency of the four-coil system is greatly improved compared to the conventional two-coil system. When the distance between the transmitter coils and the receiver coils is 1.5 cm, the transfer efficiency is 85% at the frequency of 742 kHz. The power transfer efficiency can be optimized by adding magnetic enhanced resonators. The receiving voltage signal is converted to a stable output voltage of 3.3 V and a current of 10 mA at the distance of 2 cm. In addition, the output current varies with changes in the distance. The whole implanted part is packaged with PDMS of excellent biocompatibility and the volume of it is about 1 cm(3).

Show MeSH

Related in: MedlinePlus

The equivalent circuit of power transfer system.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3472828&req=5

f3-sensors-12-10292: The equivalent circuit of power transfer system.

Mentions: The CMT [8] and circuit theory [6] are commonly applied to analyze wireless power transfer systems. The CMT can be used to analyze the distribution of electromagnetic field properly at the far or middle range in the same resonator size and material, while it is not suitable for analysis of the four-coil system. Hence the resonant coupling model is built based on the resonant circuit theory. The equivalent circuit of power transfer system is proposed [6] and shown in Figure 3.


A wireless magnetic resonance energy transfer system for micro implantable medical sensors.

Li X, Zhang H, Peng F, Li Y, Yang T, Wang B, Fang D - Sensors (Basel) (2012)

The equivalent circuit of power transfer system.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3472828&req=5

f3-sensors-12-10292: The equivalent circuit of power transfer system.
Mentions: The CMT [8] and circuit theory [6] are commonly applied to analyze wireless power transfer systems. The CMT can be used to analyze the distribution of electromagnetic field properly at the far or middle range in the same resonator size and material, while it is not suitable for analysis of the four-coil system. Hence the resonant coupling model is built based on the resonant circuit theory. The equivalent circuit of power transfer system is proposed [6] and shown in Figure 3.

Bottom Line: The energy transfer efficiency of the four-coil system is greatly improved compared to the conventional two-coil system.In addition, the output current varies with changes in the distance.The whole implanted part is packaged with PDMS of excellent biocompatibility and the volume of it is about 1 cm(3).

View Article: PubMed Central - PubMed

Affiliation: School of Electronics and Information Engineering, Beijing Jiaotong University, Beijing 100044, China. lixiuhan@bjtu.edu.cn

ABSTRACT
Based on the magnetic resonance coupling principle, in this paper a wireless energy transfer system is designed and implemented for the power supply of micro-implantable medical sensors. The entire system is composed of the in vitro part, including the energy transmitting circuit and resonant transmitter coils, and in vivo part, including the micro resonant receiver coils and signal shaping chip which includes the rectifier module and LDO voltage regulator module. Transmitter and receiver coils are wound by Litz wire, and the diameter of the receiver coils is just 1.9 cm. The energy transfer efficiency of the four-coil system is greatly improved compared to the conventional two-coil system. When the distance between the transmitter coils and the receiver coils is 1.5 cm, the transfer efficiency is 85% at the frequency of 742 kHz. The power transfer efficiency can be optimized by adding magnetic enhanced resonators. The receiving voltage signal is converted to a stable output voltage of 3.3 V and a current of 10 mA at the distance of 2 cm. In addition, the output current varies with changes in the distance. The whole implanted part is packaged with PDMS of excellent biocompatibility and the volume of it is about 1 cm(3).

Show MeSH
Related in: MedlinePlus