Limits...
Mosaicing of hyperspectral images: the application of a spectrograph imaging device.

Moroni M, Dacquino C, Cenedese A - Sensors (Basel) (2012)

Bottom Line: The resulting mosaic was successively georeferenced within the WGS-84 geographic coordinate system.This paper also addresses how this information can be transferred to a push broom type spectral imaging device to build the hyperspectral cube of the area prior to land classification.Mapping allows for the identification of objects within the image and agrees well with ground-truth measurements.

View Article: PubMed Central - PubMed

Affiliation: DICEA-Sapienza University of Rome, via Eudossiana 18, Rome 00184, Italy. monica.moroni@uniroma1.it

ABSTRACT
Hyperspectral monitoring of large areas (more than 10 km(2)) can be achieved via the use of a system employing spectrometers and CMOS cameras. A robust and efficient algorithm for automatically combining multiple, overlapping images of a scene to form a single composition (i.e., for the estimation of the point-to-point mapping between views), which uses only the information contained within the images themselves is described here. The algorithm, together with the 2D fast Fourier transform, provides an estimate of the displacement between pairs of images by accounting for rotations and changes of scale. The resulting mosaic was successively georeferenced within the WGS-84 geographic coordinate system. This paper also addresses how this information can be transferred to a push broom type spectral imaging device to build the hyperspectral cube of the area prior to land classification. The performances of the algorithm were evaluated using sample images and image sequences acquired during a proximal sensing field campaign conducted in San Teodoro (Olbia-Tempio-Sardinia). The hyperspectral cube closely corresponds to the mosaic. Mapping allows for the identification of objects within the image and agrees well with ground-truth measurements.

No MeSH data available.


Related in: MedlinePlus

Effects of the extent of overlap between image pairs on the correlation coefficients.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3472825&req=5

f6-sensors-12-10228: Effects of the extent of overlap between image pairs on the correlation coefficients.

Mentions: Figure 6 synthesizes the results obtained for different translations, rotations and changes of scale. Figure 6(a) presents the behavior of the correlation coefficient as a function of the image shift in the x, y and 45° directions. As expected, the correlation coefficient decreases with a linearly increasing shift between the image pairs. This finding is due to the reduced degree of overlap between the images. The decrease in the correlation coefficient is less consistent for translations in the y direction. The differential behavior of the correlation coefficient in various directions is dependent only on the sample image employed for the tests.


Mosaicing of hyperspectral images: the application of a spectrograph imaging device.

Moroni M, Dacquino C, Cenedese A - Sensors (Basel) (2012)

Effects of the extent of overlap between image pairs on the correlation coefficients.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3472825&req=5

f6-sensors-12-10228: Effects of the extent of overlap between image pairs on the correlation coefficients.
Mentions: Figure 6 synthesizes the results obtained for different translations, rotations and changes of scale. Figure 6(a) presents the behavior of the correlation coefficient as a function of the image shift in the x, y and 45° directions. As expected, the correlation coefficient decreases with a linearly increasing shift between the image pairs. This finding is due to the reduced degree of overlap between the images. The decrease in the correlation coefficient is less consistent for translations in the y direction. The differential behavior of the correlation coefficient in various directions is dependent only on the sample image employed for the tests.

Bottom Line: The resulting mosaic was successively georeferenced within the WGS-84 geographic coordinate system.This paper also addresses how this information can be transferred to a push broom type spectral imaging device to build the hyperspectral cube of the area prior to land classification.Mapping allows for the identification of objects within the image and agrees well with ground-truth measurements.

View Article: PubMed Central - PubMed

Affiliation: DICEA-Sapienza University of Rome, via Eudossiana 18, Rome 00184, Italy. monica.moroni@uniroma1.it

ABSTRACT
Hyperspectral monitoring of large areas (more than 10 km(2)) can be achieved via the use of a system employing spectrometers and CMOS cameras. A robust and efficient algorithm for automatically combining multiple, overlapping images of a scene to form a single composition (i.e., for the estimation of the point-to-point mapping between views), which uses only the information contained within the images themselves is described here. The algorithm, together with the 2D fast Fourier transform, provides an estimate of the displacement between pairs of images by accounting for rotations and changes of scale. The resulting mosaic was successively georeferenced within the WGS-84 geographic coordinate system. This paper also addresses how this information can be transferred to a push broom type spectral imaging device to build the hyperspectral cube of the area prior to land classification. The performances of the algorithm were evaluated using sample images and image sequences acquired during a proximal sensing field campaign conducted in San Teodoro (Olbia-Tempio-Sardinia). The hyperspectral cube closely corresponds to the mosaic. Mapping allows for the identification of objects within the image and agrees well with ground-truth measurements.

No MeSH data available.


Related in: MedlinePlus