Limits...
A wireless interface for replacing the cables in bridge-sensor applications.

Pavlin M, Novak F - Sensors (Basel) (2012)

Bottom Line: In this approach, the concept of reciprocal topology is employed, where the transmitter side acquires signals with its own transfer function and the receiver side reconstructs them with the transfer function reciprocal to the transmitter transfer function.The performance was evaluated with a dedicated data-acquisition system and finally, the test results were analyzed.The two different sets of results indicated the high level of amplitude and the temporal accuracy of the wirelessly transferred sensor signals.

View Article: PubMed Central - PubMed

Affiliation: In.Medica d.o.o., Levicnikova 34, 8310 Sentjernej, Slovenia. marko.pavlin@inmedica.si

ABSTRACT
This paper presents a solution in which a wireless interface is employed to replace the cables in bridge-sensor measurement applications. The most noticeable feature of the presented approach is the fact that the wireless interface simply replaces the cables without any additional hardware modification to the existing system. In this approach, the concept of reciprocal topology is employed, where the transmitter side acquires signals with its own transfer function and the receiver side reconstructs them with the transfer function reciprocal to the transmitter transfer function. In this paper the principle of data acquisition and reconstruction is described together with the implementation details of the signal transfer from the sensor to the signal-monitoring equipment. The wireless data communication was investigated and proprietary data-reduction methods were developed. The proposed methods and algorithms were implemented using two different wireless technologies. The performance was evaluated with a dedicated data-acquisition system and finally, the test results were analyzed. The two different sets of results indicated the high level of amplitude and the temporal accuracy of the wirelessly transferred sensor signals.

No MeSH data available.


Wireless resistive-bridge sensor interface-block diagram.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3472813&req=5

f2-sensors-12-10014: Wireless resistive-bridge sensor interface-block diagram.

Mentions: The wireless resistive-bridge sensor interface integrated in an industrial or medical sensor system consists of transmitter and receiver units connected with a secure RF link within the unlicensed Industrial, Scientific and Medical (ISM) frequency band at 2.4 GHz (Figure 2).


A wireless interface for replacing the cables in bridge-sensor applications.

Pavlin M, Novak F - Sensors (Basel) (2012)

Wireless resistive-bridge sensor interface-block diagram.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3472813&req=5

f2-sensors-12-10014: Wireless resistive-bridge sensor interface-block diagram.
Mentions: The wireless resistive-bridge sensor interface integrated in an industrial or medical sensor system consists of transmitter and receiver units connected with a secure RF link within the unlicensed Industrial, Scientific and Medical (ISM) frequency band at 2.4 GHz (Figure 2).

Bottom Line: In this approach, the concept of reciprocal topology is employed, where the transmitter side acquires signals with its own transfer function and the receiver side reconstructs them with the transfer function reciprocal to the transmitter transfer function.The performance was evaluated with a dedicated data-acquisition system and finally, the test results were analyzed.The two different sets of results indicated the high level of amplitude and the temporal accuracy of the wirelessly transferred sensor signals.

View Article: PubMed Central - PubMed

Affiliation: In.Medica d.o.o., Levicnikova 34, 8310 Sentjernej, Slovenia. marko.pavlin@inmedica.si

ABSTRACT
This paper presents a solution in which a wireless interface is employed to replace the cables in bridge-sensor measurement applications. The most noticeable feature of the presented approach is the fact that the wireless interface simply replaces the cables without any additional hardware modification to the existing system. In this approach, the concept of reciprocal topology is employed, where the transmitter side acquires signals with its own transfer function and the receiver side reconstructs them with the transfer function reciprocal to the transmitter transfer function. In this paper the principle of data acquisition and reconstruction is described together with the implementation details of the signal transfer from the sensor to the signal-monitoring equipment. The wireless data communication was investigated and proprietary data-reduction methods were developed. The proposed methods and algorithms were implemented using two different wireless technologies. The performance was evaluated with a dedicated data-acquisition system and finally, the test results were analyzed. The two different sets of results indicated the high level of amplitude and the temporal accuracy of the wirelessly transferred sensor signals.

No MeSH data available.