Limits...
Using SRAM based FPGAs for power-aware high performance wireless sensor networks.

Valverde J, Otero A, Lopez M, Portilla J, de la Torre E, Riesgo T - Sensors (Basel) (2012)

Bottom Line: At this point, the use of hardware based, and in particular FPGA solutions, might appear as a candidate technology, since though power use is higher compared with lower power devices, execution time is reduced, so energy could be reduced overall.This architecture is based on a high performance high capacity state-of-the-art FPGA, which combines the advantages of the intrinsic acceleration provided by the parallelism of hardware devices, the use of partial reconfiguration capabilities, as well as a careful power-aware management system, to show that energy savings for certain higher-end applications can be achieved.Finally, comprehensive tests have been done to validate the platform in terms of performance and power consumption, to proof that better energy efficiency compared to processor based solutions can be achieved, for instance, when encryption is imposed by the application requirements.

View Article: PubMed Central - PubMed

Affiliation: Centro de Electronica Industrial, Universidad Politecnica de Madrid, Madrid 28006, Spain. juan.valverde@upm.es

ABSTRACT
While for years traditional wireless sensor nodes have been based on ultra-low power microcontrollers with sufficient but limited computing power, the complexity and number of tasks of today's applications are constantly increasing. Increasing the node duty cycle is not feasible in all cases, so in many cases more computing power is required. This extra computing power may be achieved by either more powerful microcontrollers, though more power consumption or, in general, any solution capable of accelerating task execution. At this point, the use of hardware based, and in particular FPGA solutions, might appear as a candidate technology, since though power use is higher compared with lower power devices, execution time is reduced, so energy could be reduced overall. In order to demonstrate this, an innovative WSN node architecture is proposed. This architecture is based on a high performance high capacity state-of-the-art FPGA, which combines the advantages of the intrinsic acceleration provided by the parallelism of hardware devices, the use of partial reconfiguration capabilities, as well as a careful power-aware management system, to show that energy savings for certain higher-end applications can be achieved. Finally, comprehensive tests have been done to validate the platform in terms of performance and power consumption, to proof that better energy efficiency compared to processor based solutions can be achieved, for instance, when encryption is imposed by the application requirements.

No MeSH data available.


Cookies architecture.
© Copyright Policy
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3376580&req=5

f2-sensors-12-02667: Cookies architecture.

Mentions: The modularity of the platform can be seen in Figure 2. The vertical connectors have two main goals: acting as a join point between layers and connecting all the signals from one layer to the other. In this way, it is possible to change every layer separately if different sensors, communication modules, power supply sources, etc. are needed. This is one of the main features of this platform and can be very useful when adapting it to different requirements and scenarios. Thanks to this modularity, even though the processing layer is completely redesigned in this work, the others can be reused without further changes.


Using SRAM based FPGAs for power-aware high performance wireless sensor networks.

Valverde J, Otero A, Lopez M, Portilla J, de la Torre E, Riesgo T - Sensors (Basel) (2012)

Cookies architecture.
© Copyright Policy
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3376580&req=5

f2-sensors-12-02667: Cookies architecture.
Mentions: The modularity of the platform can be seen in Figure 2. The vertical connectors have two main goals: acting as a join point between layers and connecting all the signals from one layer to the other. In this way, it is possible to change every layer separately if different sensors, communication modules, power supply sources, etc. are needed. This is one of the main features of this platform and can be very useful when adapting it to different requirements and scenarios. Thanks to this modularity, even though the processing layer is completely redesigned in this work, the others can be reused without further changes.

Bottom Line: At this point, the use of hardware based, and in particular FPGA solutions, might appear as a candidate technology, since though power use is higher compared with lower power devices, execution time is reduced, so energy could be reduced overall.This architecture is based on a high performance high capacity state-of-the-art FPGA, which combines the advantages of the intrinsic acceleration provided by the parallelism of hardware devices, the use of partial reconfiguration capabilities, as well as a careful power-aware management system, to show that energy savings for certain higher-end applications can be achieved.Finally, comprehensive tests have been done to validate the platform in terms of performance and power consumption, to proof that better energy efficiency compared to processor based solutions can be achieved, for instance, when encryption is imposed by the application requirements.

View Article: PubMed Central - PubMed

Affiliation: Centro de Electronica Industrial, Universidad Politecnica de Madrid, Madrid 28006, Spain. juan.valverde@upm.es

ABSTRACT
While for years traditional wireless sensor nodes have been based on ultra-low power microcontrollers with sufficient but limited computing power, the complexity and number of tasks of today's applications are constantly increasing. Increasing the node duty cycle is not feasible in all cases, so in many cases more computing power is required. This extra computing power may be achieved by either more powerful microcontrollers, though more power consumption or, in general, any solution capable of accelerating task execution. At this point, the use of hardware based, and in particular FPGA solutions, might appear as a candidate technology, since though power use is higher compared with lower power devices, execution time is reduced, so energy could be reduced overall. In order to demonstrate this, an innovative WSN node architecture is proposed. This architecture is based on a high performance high capacity state-of-the-art FPGA, which combines the advantages of the intrinsic acceleration provided by the parallelism of hardware devices, the use of partial reconfiguration capabilities, as well as a careful power-aware management system, to show that energy savings for certain higher-end applications can be achieved. Finally, comprehensive tests have been done to validate the platform in terms of performance and power consumption, to proof that better energy efficiency compared to processor based solutions can be achieved, for instance, when encryption is imposed by the application requirements.

No MeSH data available.