Limits...
Novel docetaxel-loaded nanoparticles based on poly(lactide-co-caprolactone) and poly(lactide-co-glycolide-co-caprolactone) for prostate cancer treatment: formulation, characterization, and cytotoxicity studies.

Sanna V, Roggio AM, Posadino AM, Cossu A, Marceddu S, Mariani A, Alzari V, Uzzau S, Pintus G, Sechi M - Nanoscale Res Lett (2011)

Bottom Line: However, alternative formulations are needed to overcome the serious side effects, also due to the adjuvant used, and to improve the clinical efficacy of the drug.In the present study, two novel biodegradable block-copolymers, poly(lactide-co-caprolactone) (PLA-PCL) and poly(lactide-co-caprolactone-co-glycolide) (PLGA-PCL), were explored for the formulation of Dtx-loaded NPs and compared with PLA- and PLGA-NPs.NPs were found to be of spherical shape with an average diameter in the range of 100 to 200 nm and a unimodal particle size distribution.PLA-PCL and PLGA-PCL drug loaded NPs shared an overlapping release profiles, and are able to release about 90% of drug within 6 h, when compared with PLA- and PLGA-NPs.

View Article: PubMed Central - HTML - PubMed

Affiliation: Porto Conte Ricerche, Località Tramariglio, Alghero, Sassari 07041, Italy. sannav@portocontericerche.it.

ABSTRACT
Docetaxel (Dtx) chemotherapy is the optional treatment in patients with hormone-refractory metastatic prostate cancer, and Dtx-loaded polymeric nanoparticles (NPs) have the potential to induce durable clinical responses. However, alternative formulations are needed to overcome the serious side effects, also due to the adjuvant used, and to improve the clinical efficacy of the drug.In the present study, two novel biodegradable block-copolymers, poly(lactide-co-caprolactone) (PLA-PCL) and poly(lactide-co-caprolactone-co-glycolide) (PLGA-PCL), were explored for the formulation of Dtx-loaded NPs and compared with PLA- and PLGA-NPs. The nanosystems were prepared by an original nanoprecipitation method, using Pluronic F-127 as surfactant agent, and were characterized in terms of morphology, size distribution, encapsulation efficiency, crystalline structure, and in vitro release. To evaluate the potential anticancer efficacy of a nanoparticulate system, in vitro cytotoxicity studies on human prostate cancer cell line (PC3) were carried out. NPs were found to be of spherical shape with an average diameter in the range of 100 to 200 nm and a unimodal particle size distribution. Dtx was incorporated into the PLGA-PCL NPs with higher (p < 0.05) encapsulation efficiency than that of other polymers. Differential scanning calorimetry suggested that Dtx was molecularly dispersed in the polymeric matrices. In vitro drug release study showed that release profiles of Dtx varied on the bases of characteristics of polymers used for formulation. PLA-PCL and PLGA-PCL drug loaded NPs shared an overlapping release profiles, and are able to release about 90% of drug within 6 h, when compared with PLA- and PLGA-NPs. Moreover, cytotoxicity studies demonstrated advantages of the Dtx-loaded PLGA-PCL NPs over pure Dtx in both time- and concentration-dependent manner. In particular, an increase of 20% of PC3 growth inhibition was determined by PLGA-PCL NPs with respect to free drug after 72 h incubation and at all tested Dtx concentration. In summary, PLGA-PCL copolymer may be considered as an attractive and promising polymeric material for the formulation of Dtx NPs as delivery system for prostate cancer treatment, and can also be pursued as a validated system in a more large context.

No MeSH data available.


Related in: MedlinePlus

Viability of PC3 cells cultured with drug-free nanoparticles (NP), docetaxel-loaded PLGA-PCL NPs (NP-Dtx) after 24 h (a), 48 h (b) and 72 h (c), in comparison with that of pure drug (Dtx) at the same dose (n = 3). Asterisks, significantly different from control; circle, significantly different from each other.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3211323&req=5

Figure 5: Viability of PC3 cells cultured with drug-free nanoparticles (NP), docetaxel-loaded PLGA-PCL NPs (NP-Dtx) after 24 h (a), 48 h (b) and 72 h (c), in comparison with that of pure drug (Dtx) at the same dose (n = 3). Asterisks, significantly different from control; circle, significantly different from each other.

Mentions: Figure 5 shows the viability of PC3 cancer cells, cultured with unloaded PLGA-PCL NPs, and Dtx-loaded PLGA-PCL NPs, after incubation for 24 h (a), 48 (b), and 72 h (c), in comparison with that of pure drug at 0.05, 0.5, and 5.0 μg/ml equivalent Dtx concentrations.


Novel docetaxel-loaded nanoparticles based on poly(lactide-co-caprolactone) and poly(lactide-co-glycolide-co-caprolactone) for prostate cancer treatment: formulation, characterization, and cytotoxicity studies.

Sanna V, Roggio AM, Posadino AM, Cossu A, Marceddu S, Mariani A, Alzari V, Uzzau S, Pintus G, Sechi M - Nanoscale Res Lett (2011)

Viability of PC3 cells cultured with drug-free nanoparticles (NP), docetaxel-loaded PLGA-PCL NPs (NP-Dtx) after 24 h (a), 48 h (b) and 72 h (c), in comparison with that of pure drug (Dtx) at the same dose (n = 3). Asterisks, significantly different from control; circle, significantly different from each other.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3211323&req=5

Figure 5: Viability of PC3 cells cultured with drug-free nanoparticles (NP), docetaxel-loaded PLGA-PCL NPs (NP-Dtx) after 24 h (a), 48 h (b) and 72 h (c), in comparison with that of pure drug (Dtx) at the same dose (n = 3). Asterisks, significantly different from control; circle, significantly different from each other.
Mentions: Figure 5 shows the viability of PC3 cancer cells, cultured with unloaded PLGA-PCL NPs, and Dtx-loaded PLGA-PCL NPs, after incubation for 24 h (a), 48 (b), and 72 h (c), in comparison with that of pure drug at 0.05, 0.5, and 5.0 μg/ml equivalent Dtx concentrations.

Bottom Line: However, alternative formulations are needed to overcome the serious side effects, also due to the adjuvant used, and to improve the clinical efficacy of the drug.In the present study, two novel biodegradable block-copolymers, poly(lactide-co-caprolactone) (PLA-PCL) and poly(lactide-co-caprolactone-co-glycolide) (PLGA-PCL), were explored for the formulation of Dtx-loaded NPs and compared with PLA- and PLGA-NPs.NPs were found to be of spherical shape with an average diameter in the range of 100 to 200 nm and a unimodal particle size distribution.PLA-PCL and PLGA-PCL drug loaded NPs shared an overlapping release profiles, and are able to release about 90% of drug within 6 h, when compared with PLA- and PLGA-NPs.

View Article: PubMed Central - HTML - PubMed

Affiliation: Porto Conte Ricerche, Località Tramariglio, Alghero, Sassari 07041, Italy. sannav@portocontericerche.it.

ABSTRACT
Docetaxel (Dtx) chemotherapy is the optional treatment in patients with hormone-refractory metastatic prostate cancer, and Dtx-loaded polymeric nanoparticles (NPs) have the potential to induce durable clinical responses. However, alternative formulations are needed to overcome the serious side effects, also due to the adjuvant used, and to improve the clinical efficacy of the drug.In the present study, two novel biodegradable block-copolymers, poly(lactide-co-caprolactone) (PLA-PCL) and poly(lactide-co-caprolactone-co-glycolide) (PLGA-PCL), were explored for the formulation of Dtx-loaded NPs and compared with PLA- and PLGA-NPs. The nanosystems were prepared by an original nanoprecipitation method, using Pluronic F-127 as surfactant agent, and were characterized in terms of morphology, size distribution, encapsulation efficiency, crystalline structure, and in vitro release. To evaluate the potential anticancer efficacy of a nanoparticulate system, in vitro cytotoxicity studies on human prostate cancer cell line (PC3) were carried out. NPs were found to be of spherical shape with an average diameter in the range of 100 to 200 nm and a unimodal particle size distribution. Dtx was incorporated into the PLGA-PCL NPs with higher (p < 0.05) encapsulation efficiency than that of other polymers. Differential scanning calorimetry suggested that Dtx was molecularly dispersed in the polymeric matrices. In vitro drug release study showed that release profiles of Dtx varied on the bases of characteristics of polymers used for formulation. PLA-PCL and PLGA-PCL drug loaded NPs shared an overlapping release profiles, and are able to release about 90% of drug within 6 h, when compared with PLA- and PLGA-NPs. Moreover, cytotoxicity studies demonstrated advantages of the Dtx-loaded PLGA-PCL NPs over pure Dtx in both time- and concentration-dependent manner. In particular, an increase of 20% of PC3 growth inhibition was determined by PLGA-PCL NPs with respect to free drug after 72 h incubation and at all tested Dtx concentration. In summary, PLGA-PCL copolymer may be considered as an attractive and promising polymeric material for the formulation of Dtx NPs as delivery system for prostate cancer treatment, and can also be pursued as a validated system in a more large context.

No MeSH data available.


Related in: MedlinePlus