Limits...
Synthesis, structure, and opto-electronic properties of organic-based nanoscale heterojunctions.

Rezek B, Cermák J, Kromka A, Ledinský M, Hubík P, Mareš JJ, Purkrt A, Cimrová V, Fejfar A, Kočka J - Nanoscale Res Lett (2011)

Bottom Line: We show that employing and combining advanced scanning probe techniques can provide us significant insight into the correlation of these properties.These data are further correlated with local material composition detected using micro-Raman spectroscopy and with other electronic transport data.We demonstrate benefits of this multi-dimensional characterizations on (i) bulk heterojunction of fully organic composite films, indicating differences in blend quality and component segregation leading to local shunts of photovoltaic cell, and (ii) thin-film heterojunction of polypyrrole (PPy) electropolymerized on hydrogen-terminated diamond, indicating covalent bonding and transfer of charge carriers from PPy to diamond.

View Article: PubMed Central - HTML - PubMed

Affiliation: Institute of Physics ASCR, v,v,i,, Cukrovarnická 10, 16200 Prague 6, Czech Republic. rezek@fzu.cz.

ABSTRACT
Enormous research effort has been put into optimizing organic-based opto-electronic systems for efficient generation of free charge carriers. This optimization is mainly due to typically high dissociation energy (0.1-1 eV) and short diffusion length (10 nm) of excitons in organic materials. Inherently, interplay of microscopic structural, chemical, and opto-electronic properties plays crucial role. We show that employing and combining advanced scanning probe techniques can provide us significant insight into the correlation of these properties. By adjusting parameters of contact- and tapping-mode atomic force microscopy (AFM), we perform morphologic and mechanical characterizations (nanoshaving) of organic layers, measure their electrical conductivity by current-sensing AFM, and deduce work functions and surface photovoltage (SPV) effects by Kelvin force microscopy using high spatial resolution. These data are further correlated with local material composition detected using micro-Raman spectroscopy and with other electronic transport data. We demonstrate benefits of this multi-dimensional characterizations on (i) bulk heterojunction of fully organic composite films, indicating differences in blend quality and component segregation leading to local shunts of photovoltaic cell, and (ii) thin-film heterojunction of polypyrrole (PPy) electropolymerized on hydrogen-terminated diamond, indicating covalent bonding and transfer of charge carriers from PPy to diamond.

No MeSH data available.


Related in: MedlinePlus

Energetic scheme of the PPy-diamond system in equilibrium in the dark (full line) and under white light illumination (dashed line).
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3211298&req=5

Figure 8: Energetic scheme of the PPy-diamond system in equilibrium in the dark (full line) and under white light illumination (dashed line).

Mentions: Based on the surface potentials combined with data from the literature for both materials, we were able to assemble the energy band configuration of the PPy-diamond system (Figure 8). Detailed description of the procedure for band diagram assembly is given in [45]. Theoretical calculations showed that, for the PPy-C:H interface, the charge neutrality level is located below the Fermi level, so the transfer of electrons occurs from an electrode to the PPy molecules [54]. This confirm downward band bending of PPy bands at the junction to diamond.


Synthesis, structure, and opto-electronic properties of organic-based nanoscale heterojunctions.

Rezek B, Cermák J, Kromka A, Ledinský M, Hubík P, Mareš JJ, Purkrt A, Cimrová V, Fejfar A, Kočka J - Nanoscale Res Lett (2011)

Energetic scheme of the PPy-diamond system in equilibrium in the dark (full line) and under white light illumination (dashed line).
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3211298&req=5

Figure 8: Energetic scheme of the PPy-diamond system in equilibrium in the dark (full line) and under white light illumination (dashed line).
Mentions: Based on the surface potentials combined with data from the literature for both materials, we were able to assemble the energy band configuration of the PPy-diamond system (Figure 8). Detailed description of the procedure for band diagram assembly is given in [45]. Theoretical calculations showed that, for the PPy-C:H interface, the charge neutrality level is located below the Fermi level, so the transfer of electrons occurs from an electrode to the PPy molecules [54]. This confirm downward band bending of PPy bands at the junction to diamond.

Bottom Line: We show that employing and combining advanced scanning probe techniques can provide us significant insight into the correlation of these properties.These data are further correlated with local material composition detected using micro-Raman spectroscopy and with other electronic transport data.We demonstrate benefits of this multi-dimensional characterizations on (i) bulk heterojunction of fully organic composite films, indicating differences in blend quality and component segregation leading to local shunts of photovoltaic cell, and (ii) thin-film heterojunction of polypyrrole (PPy) electropolymerized on hydrogen-terminated diamond, indicating covalent bonding and transfer of charge carriers from PPy to diamond.

View Article: PubMed Central - HTML - PubMed

Affiliation: Institute of Physics ASCR, v,v,i,, Cukrovarnická 10, 16200 Prague 6, Czech Republic. rezek@fzu.cz.

ABSTRACT
Enormous research effort has been put into optimizing organic-based opto-electronic systems for efficient generation of free charge carriers. This optimization is mainly due to typically high dissociation energy (0.1-1 eV) and short diffusion length (10 nm) of excitons in organic materials. Inherently, interplay of microscopic structural, chemical, and opto-electronic properties plays crucial role. We show that employing and combining advanced scanning probe techniques can provide us significant insight into the correlation of these properties. By adjusting parameters of contact- and tapping-mode atomic force microscopy (AFM), we perform morphologic and mechanical characterizations (nanoshaving) of organic layers, measure their electrical conductivity by current-sensing AFM, and deduce work functions and surface photovoltage (SPV) effects by Kelvin force microscopy using high spatial resolution. These data are further correlated with local material composition detected using micro-Raman spectroscopy and with other electronic transport data. We demonstrate benefits of this multi-dimensional characterizations on (i) bulk heterojunction of fully organic composite films, indicating differences in blend quality and component segregation leading to local shunts of photovoltaic cell, and (ii) thin-film heterojunction of polypyrrole (PPy) electropolymerized on hydrogen-terminated diamond, indicating covalent bonding and transfer of charge carriers from PPy to diamond.

No MeSH data available.


Related in: MedlinePlus