Limits...
Rapid thermal annealing and crystallization mechanisms study of silicon nanocrystal in silicon carbide matrix.

Wan Z, Huang S, Green MA, Conibeer G - Nanoscale Res Lett (2011)

Bottom Line: In this paper, a positive effect of rapid thermal annealing (RTA) technique has been researched and compared with conventional furnace annealing for Si nanocrystalline in silicon carbide (SiC) matrix system.Much better "degree of crystallization" of Si-NC can be achieved in RTA than furnace annealing from the research of GIXRD and Raman analysis, especially in high-Si-concentration situation.Differences from the two annealing procedures and the crystallization mechanism have been discussed based on the experimental results.

View Article: PubMed Central - HTML - PubMed

Affiliation: ARC Photovoltaics Centre of Excellence, University of New South Wales (UNSW), Sydney, Australia. z.wan@student.unsw.edu.au.

ABSTRACT
In this paper, a positive effect of rapid thermal annealing (RTA) technique has been researched and compared with conventional furnace annealing for Si nanocrystalline in silicon carbide (SiC) matrix system. Amorphous Si-rich SiC layer has been deposited by co-sputtering in different Si concentrations (50 to approximately 80 v%). Si nanocrystals (Si-NC) containing different grain sizes have been fabricated within the SiC matrix under two different annealing conditions: furnace annealing and RTA both at 1,100°C. HRTEM image clearly reveals both Si and SiC-NC formed in the films. Much better "degree of crystallization" of Si-NC can be achieved in RTA than furnace annealing from the research of GIXRD and Raman analysis, especially in high-Si-concentration situation. Differences from the two annealing procedures and the crystallization mechanism have been discussed based on the experimental results.

No MeSH data available.


Related in: MedlinePlus

Si and SiC grain size from RTA and furnace annealing in different Si concentration.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3211175&req=5

Figure 5: Si and SiC grain size from RTA and furnace annealing in different Si concentration.

Mentions: where λ is the wavelength of the X-rays, θ is the Bragg diffraction angle at the peak position in degrees, Δ(2θ) is the FWHM in radian, and k is a correction factor. The value of k is usually chosen to be 0.9 for Si films. Nanocrystal sizes from RTA and furnace annealing samples are calculated by this formula and are indicated and compared in Figure 5.


Rapid thermal annealing and crystallization mechanisms study of silicon nanocrystal in silicon carbide matrix.

Wan Z, Huang S, Green MA, Conibeer G - Nanoscale Res Lett (2011)

Si and SiC grain size from RTA and furnace annealing in different Si concentration.
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3211175&req=5

Figure 5: Si and SiC grain size from RTA and furnace annealing in different Si concentration.
Mentions: where λ is the wavelength of the X-rays, θ is the Bragg diffraction angle at the peak position in degrees, Δ(2θ) is the FWHM in radian, and k is a correction factor. The value of k is usually chosen to be 0.9 for Si films. Nanocrystal sizes from RTA and furnace annealing samples are calculated by this formula and are indicated and compared in Figure 5.

Bottom Line: In this paper, a positive effect of rapid thermal annealing (RTA) technique has been researched and compared with conventional furnace annealing for Si nanocrystalline in silicon carbide (SiC) matrix system.Much better "degree of crystallization" of Si-NC can be achieved in RTA than furnace annealing from the research of GIXRD and Raman analysis, especially in high-Si-concentration situation.Differences from the two annealing procedures and the crystallization mechanism have been discussed based on the experimental results.

View Article: PubMed Central - HTML - PubMed

Affiliation: ARC Photovoltaics Centre of Excellence, University of New South Wales (UNSW), Sydney, Australia. z.wan@student.unsw.edu.au.

ABSTRACT
In this paper, a positive effect of rapid thermal annealing (RTA) technique has been researched and compared with conventional furnace annealing for Si nanocrystalline in silicon carbide (SiC) matrix system. Amorphous Si-rich SiC layer has been deposited by co-sputtering in different Si concentrations (50 to approximately 80 v%). Si nanocrystals (Si-NC) containing different grain sizes have been fabricated within the SiC matrix under two different annealing conditions: furnace annealing and RTA both at 1,100°C. HRTEM image clearly reveals both Si and SiC-NC formed in the films. Much better "degree of crystallization" of Si-NC can be achieved in RTA than furnace annealing from the research of GIXRD and Raman analysis, especially in high-Si-concentration situation. Differences from the two annealing procedures and the crystallization mechanism have been discussed based on the experimental results.

No MeSH data available.


Related in: MedlinePlus