Limits...
Discussion on the thermal conductivity enhancement of nanofluids.

Xie H, Yu W, Li Y, Chen L - Nanoscale Res Lett (2011)

Bottom Line: We produced a series of nanofluids and measured their thermal conductivities.Various nanoparticles (NPs) involving Al2O3 NPs with different sizes, SiC NPs with different shapes, MgO NPs, ZnO NPs, SiO2 NPs, Fe3O4 NPs, TiO2 NPs, diamond NPs, and carbon nanotubes with different pretreatments were used as additives.The thermal transport mechanisms in nanofluids were further discussed, and the promising approaches for optimizing the thermal conductivity of nanofluids have been proposed.

View Article: PubMed Central - HTML - PubMed

Affiliation: School of Urban Development and Environmental Engineering, Shanghai Second Polytechnic University, Shanghai 201209, China. hqxie@eed.sspu.cn.

ABSTRACT
Increasing interests have been paid to nanofluids because of the intriguing heat transfer enhancement performances presented by this kind of promising heat transfer media. We produced a series of nanofluids and measured their thermal conductivities. In this article, we discussed the measurements and the enhancements of the thermal conductivity of a variety of nanofluids. The base fluids used included those that are most employed heat transfer fluids, such as deionized water (DW), ethylene glycol (EG), glycerol, silicone oil, and the binary mixture of DW and EG. Various nanoparticles (NPs) involving Al2O3 NPs with different sizes, SiC NPs with different shapes, MgO NPs, ZnO NPs, SiO2 NPs, Fe3O4 NPs, TiO2 NPs, diamond NPs, and carbon nanotubes with different pretreatments were used as additives. Our findings demonstrated that the thermal conductivity enhancements of nanofluids could be influenced by multi-faceted factors including the volume fraction of the dispersed NPs, the tested temperature, the thermal conductivity of the base fluid, the size of the dispersed NPs, the pretreatment process, and the additives of the fluids. The thermal transport mechanisms in nanofluids were further discussed, and the promising approaches for optimizing the thermal conductivity of nanofluids have been proposed.

No MeSH data available.


Related in: MedlinePlus

Enhanced thermal conductivity ratios as a function of the SSAs: Al2O3-EG [7]; Al2O3-PO [7].
© Copyright Policy - open-access
Related In: Results  -  Collection

License
getmorefigures.php?uid=PMC3211170&req=5

Figure 4: Enhanced thermal conductivity ratios as a function of the SSAs: Al2O3-EG [7]; Al2O3-PO [7].

Mentions: Figure 4 presents the thermal conductivity enhancement of the nanofluids as a function of the specific surface area (SSA) of the suspended particles [7]. It is seen that the thermal conductivity enhancement increases first, and then decreases with an increase in the SSA, with the largest thermal conductivity at a particle SSA of 25 m2 · g-1. We ascribe the thermal conductivity change behavior to twofold factors. First, as particle size decreases, the SSA of the particle increases proportionally. Heat transfer between the particle and the fluid takes place at the particle-fluid interface. Therefore, a dramatic enhancement in thermal conductivity is expected because a reduction in particle size can result in large interfacial area. Second, the mean free path in polycrystalline Al2O3 is estimated to be around 35 nm, which is comparable to the size of the particle that was used. The intrinsic thermal conductivity of nanosized Al2O3 particle may be reduced compared to that of bulk Al2O3 due to the scattering of the primary carriers of energy (phonon) at the particle boundary. It is expected that the suspension's thermal conductivity is reduced with an increase in the SSA. Therefore, for a suspension containing NPs at a particle size much different from the mean free path, the thermal conductivity increases when the particle size decreases because the first factor is dominant. However, when the size of the dispersed NPs is close to or smaller than the mean free path, the second factor will govern the mechanism of the thermal conductivity behavior of the suspension.


Discussion on the thermal conductivity enhancement of nanofluids.

Xie H, Yu W, Li Y, Chen L - Nanoscale Res Lett (2011)

Enhanced thermal conductivity ratios as a function of the SSAs: Al2O3-EG [7]; Al2O3-PO [7].
© Copyright Policy - open-access
Related In: Results  -  Collection

License
Show All Figures
getmorefigures.php?uid=PMC3211170&req=5

Figure 4: Enhanced thermal conductivity ratios as a function of the SSAs: Al2O3-EG [7]; Al2O3-PO [7].
Mentions: Figure 4 presents the thermal conductivity enhancement of the nanofluids as a function of the specific surface area (SSA) of the suspended particles [7]. It is seen that the thermal conductivity enhancement increases first, and then decreases with an increase in the SSA, with the largest thermal conductivity at a particle SSA of 25 m2 · g-1. We ascribe the thermal conductivity change behavior to twofold factors. First, as particle size decreases, the SSA of the particle increases proportionally. Heat transfer between the particle and the fluid takes place at the particle-fluid interface. Therefore, a dramatic enhancement in thermal conductivity is expected because a reduction in particle size can result in large interfacial area. Second, the mean free path in polycrystalline Al2O3 is estimated to be around 35 nm, which is comparable to the size of the particle that was used. The intrinsic thermal conductivity of nanosized Al2O3 particle may be reduced compared to that of bulk Al2O3 due to the scattering of the primary carriers of energy (phonon) at the particle boundary. It is expected that the suspension's thermal conductivity is reduced with an increase in the SSA. Therefore, for a suspension containing NPs at a particle size much different from the mean free path, the thermal conductivity increases when the particle size decreases because the first factor is dominant. However, when the size of the dispersed NPs is close to or smaller than the mean free path, the second factor will govern the mechanism of the thermal conductivity behavior of the suspension.

Bottom Line: We produced a series of nanofluids and measured their thermal conductivities.Various nanoparticles (NPs) involving Al2O3 NPs with different sizes, SiC NPs with different shapes, MgO NPs, ZnO NPs, SiO2 NPs, Fe3O4 NPs, TiO2 NPs, diamond NPs, and carbon nanotubes with different pretreatments were used as additives.The thermal transport mechanisms in nanofluids were further discussed, and the promising approaches for optimizing the thermal conductivity of nanofluids have been proposed.

View Article: PubMed Central - HTML - PubMed

Affiliation: School of Urban Development and Environmental Engineering, Shanghai Second Polytechnic University, Shanghai 201209, China. hqxie@eed.sspu.cn.

ABSTRACT
Increasing interests have been paid to nanofluids because of the intriguing heat transfer enhancement performances presented by this kind of promising heat transfer media. We produced a series of nanofluids and measured their thermal conductivities. In this article, we discussed the measurements and the enhancements of the thermal conductivity of a variety of nanofluids. The base fluids used included those that are most employed heat transfer fluids, such as deionized water (DW), ethylene glycol (EG), glycerol, silicone oil, and the binary mixture of DW and EG. Various nanoparticles (NPs) involving Al2O3 NPs with different sizes, SiC NPs with different shapes, MgO NPs, ZnO NPs, SiO2 NPs, Fe3O4 NPs, TiO2 NPs, diamond NPs, and carbon nanotubes with different pretreatments were used as additives. Our findings demonstrated that the thermal conductivity enhancements of nanofluids could be influenced by multi-faceted factors including the volume fraction of the dispersed NPs, the tested temperature, the thermal conductivity of the base fluid, the size of the dispersed NPs, the pretreatment process, and the additives of the fluids. The thermal transport mechanisms in nanofluids were further discussed, and the promising approaches for optimizing the thermal conductivity of nanofluids have been proposed.

No MeSH data available.


Related in: MedlinePlus